
CLOCK
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
VALIDATOR JIG is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 55.9 × 76.2 mm with 16 parts on 9 nets, routed with 41 tracks and 1 via.
Its parts include 5 resistors, 1 IC and 1 connector. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | FormantKO:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | 100k | FormantKO:R_Axial_Horizontal | R1, R3 |
| 2 | 143k | FormantKO:R_Axial_Horizontal | R2, R4 |
| 1 | 75k | FormantKO:R_Axial_Horizontal | R5 |
| 1 | GND | FormantKO:KEYSTONE_5001 | TP5 |
| 1 | POWER | Connector:Banana_Jack_3Pin | J1 |
| 1 | VC1 | FormantKO:KEYSTONE_5000 | TP3 |
| 1 | VC2 | FormantKO:KEYSTONE_5000 | TP1 |
| 1 | VE1 | FormantKO:KEYSTONE_5117 | TP4 |
| 1 | VE2 | FormantKO:KEYSTONE_5117 | TP2 |
| 1 | µA726 | FormantKO:TO-100 | IC1 |

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 55.9 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is system/VALIDATOR_JIG/VALIDATOR_JIG.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).