Skip to the content
2 layers177.8 × 113 mmPSU, the printed circuit board in 3D

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Size
177.8 × 113 mm
Copper layers
2
Thickness
1.6 mm
Parts
74
Nets
58
Pads
203
Tracks, vias
408, 6
Pours
27
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 May 2026
Updated
28 Aug 2026

Overview

PSU is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 177.8 × 113 mm with 74 parts on 58 nets, routed with 408 tracks and 6 vias.

Its parts include 24 resistors, 14 capacitors, 7 connectors, 6 diodes and 3 ICs. It belongs with the audio and music and power boards of this library.

README

MFOS/panels/ANALOG/README.md

ANALOG

CV-16

Format: 6U

Status

⚠️ Incomplete⚠️

Documents

Gerber to Order

⚠️ Untested⚠️

Images

Rendered Panel Front

Rendered Panel Back

Parts

74
QtyValueFootprintReferences
62R7FormantKO:R_Axial_HorizontalR3, R4, R5, R6, R19, R20
5100nFormantKO:C_Rect_300C3, C4, C9, C11, C12
46k8FormantKO:R_Axial_HorizontalR11, R12, R13, R14
4MountingHoleFormantKO:MountingHole_2.7mm_M2.5H1, H2, H3, H4
31N4002FormantKO:DO-41D1, D2, D3
31nFormantKO:C_Rect_300C5, C6, C13
32AFormantKO:FuseHolder_5x20mmF1, F2, F3
32N3055FormantKO:PowerTransistorConnector_EBCT1, T2, T3
32k5FormantKO:Potentiometer_Trimmer_MultiTurnP1, P2, P3
3BRIDGE_RECTIFIERFormantKO:BridgeRectifierB1, B2, B3
3LM723FormantKO:DIP-14IC2, IC3, U1
210µCapacitor_THT:CP_Radial_Tantal_D4.5mm_P5.00mmC7, C8
218VAC 1AFormantKO:TransformerConnectorJ1, J2
21kFormantKO:R_Axial_HorizontalR7, R8
22200µCapacitor_THT:CP_Axial_L42.0mm_D23.0mm_P45.00mm_HorizontalC1, C2
222kFormantKO:R_Axial_HorizontalR9, R10
22k7FormantKO:R_Axial_HorizontalR17, R22
23k9FormantKO:R_Axial_HorizontalR1, R2
2680RFormantKO:R_Axial_HorizontalR15, R16
1+15VFormantKO:KEYSTONE_5001TP1
1+15V LEDFormantKO:PanelConnector_1x02D4
1+15V METERFormantKO:PanelConnector_1x02M1
1+5VFormantKO:KEYSTONE_5001TP3
1+5V LEDFormantKO:PanelConnector_1x02D6
1+5V METERFormantKO:PanelConnector_1x02M3
1-15VFormantKO:KEYSTONE_5001TP2
1-15V LEDFormantKO:PanelConnector_1x02D5
1-15V METERFormantKO:PanelConnector_1x02M2
110VAC 1AFormantKO:TransformerConnectorJ3
110µFormantKO:CP_Axial_600C14
1150RFormantKO:R_Axial_HorizontalR24
115kFormantKO:R_Axial_HorizontalR23
12200µCapacitor_THT:CP_Axial_L30.0mm_D18.0mm_P35.00mm_HorizontalC10
12k2FormantKO:R_Axial_HorizontalR21
18k2FormantKO:R_Axial_HorizontalR18
1GNDFormantKO:KEYSTONE_5001TP4
1TO BUSFormantKO:BusPowerConnectorJ4

More from Desval27/FormantKO

12
  • 2 layers160 × 100 mmCLOCK, the printed circuit board in 3D

    CLOCK

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    135 partsMIT
  • 2 layers160 × 233.4 mmVCO, the printed circuit board in 3D

    VCO

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    129 partsMIT
  • 2 layers160 × 233.4 mmVCF 24, the printed circuit board in 3D

    VCF 24

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    112 partsMIT
  • 2 layers160 × 100 mmDELAYED MOD, the printed circuit board in 3D

    DELAYED MOD

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    101 partsMIT
  • 2 layers160 × 100 mmANALOG, the printed circuit board in 3D

    ANALOG

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    96 partsMIT
  • 2 layers160 × 100 mmLFOs, the printed circuit board in 3D

    LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    94 partsMIT
  • 2 layers160 × 233.4 mmRFM, the printed circuit board in 3D

    RFM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    93 partsMIT
  • 2 layers160 × 100 mmVC LFOs, the printed circuit board in 3D

    VC LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    92 partsMIT
  • 2 layers160 × 100 mmCOM, the printed circuit board in 3D

    COM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    85 partsMIT
  • 2 layers160 × 100 mmADSR, the printed circuit board in 3D

    ADSR

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    82 partsMIT
  • 2 layers160 × 100 mmPHASE SHIFTER, the printed circuit board in 3D

    PHASE SHIFTER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    79 partsMIT
  • 2 layers160 × 100 mmEXPANDER, the printed circuit board in 3D

    EXPANDER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    77 partsMIT

Similar boards

  • 2 layers141.1 × 126.8 mmCalculator, the printed circuit board in 3D

    Calculator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    74 parts915
  • 2 layers49 × 44 mmSimple keeb reuser, the printed circuit board in 3D

    Simple keeb reuser

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    74 parts253GPL-3.0
  • 2 layers49 × 49 mmOSBMS Balancer Rev1 sot323, the printed circuit board in 3D

    OSBMS Balancer Rev1 sot323

    Teslafly/Dead-OpenBMS-dead

    A scalable, open source battery management system

    74 parts248
  • 2 layers72.4 × 72.4 mmSerialResonantFilter, the printed circuit board in 3D

    SerialResonantFilter

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    74 parts222
  • 2 layers58 × 65 mmSidechain mixer core, the printed circuit board in 3D

    Sidechain mixer core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    74 parts222
  • 2 layers110 × 60 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V3

    This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.

    74 parts207GPL-3.0
  • 2 layers51.5 × 89 mmMobo, the printed circuit board in 3D

    Mobo

    opulo-inc/feeder

    Source for LumenPnP Feeders

    74 parts202
  • 2 layers165.7 × 152.4 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    74 parts184

Questions

How big is the PSU PCB?

It measures 177.8 × 113 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PSU use?

74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PSU KiCad files?

From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is system/PSU/PSU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PSU design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).