2 layers259.2 × 100.9 mm
2 layers252.6 × 98.3 mm
Assemble
derui/Clairink- Size
- 252.6 × 98.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 148
- Nets
- 106
- Pads
- 558
- Tracks, vias
- 1,093, 315
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 8 Mar 2026
- Updated
- 7 Jun 2026
Overview
Assemble is an open-source printed circuit board by derui, from the derui/Clairink repository on GitHub, published under the MIT licence. It is a 2-layer board of 252.6 × 98.3 mm with 148 parts on 106 nets, routed with 1,093 tracks and 315 vias.
It is built around the DMG3414U. Its parts include 58 diodes, 46 switches, 12 resistors, 4 capacitors and 4 connectors. It belongs with the nRF52 and nRF5x boards of this library.
Main components
1Parts
148| Qty | Value | Footprint | References |
|---|---|---|---|
| 58 | D | kbd_Parts:Diode_SMD | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +42 |
| 42 | SW_Push | kicad-lib:Choc_v2_Hotswap_1u_16.6 | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +26 |
| 12 | Val** | kbd_Hole:Mouse_Bite_Hole | Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref** |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4 |
| 4 | 2.2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | 470k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8, R9, R11 |
| 4 | Conn_01x03 | Connector_JST:JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J1, J2, J3, J4 |
| 4 | Val** | kbd_Hole:m2_Screw_Hole | Ref**, Ref**, Ref**, Ref** |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R12 |
| 2 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | Battery_Cell | kbd_Parts:Battery_AAA | BT1, BT2 |
| 2 | DMG3414U | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | RotaryEncoder_Switch | kbd_Parts:RotaryEncoder_EC12E | SW45, SW46 |
| 2 | SW_SPDT | kbd_Parts:TGSW_MSK-12D19 | SW43, SW44 |
| 2 | XIAO-nRF52840-SMD | xiao:XIAO-nRF52840-SMD | U1, U2 |
| 2 | ~ | kicad-lib:AE-XCL102D333CR-G | AE-XCL102D333CR-G1, AE-XCL102D333CR-G2 |
Questions
How big is the Assemble PCB?
It measures 252.6 × 98.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Assemble use?
148 parts, built around the DMG3414U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Assemble KiCad files?
From the derui/Clairink repository on GitHub, at the commit this page was made from: the board is v2/assemble-final/assemble.kicad_pcb and its schematic v1/assemble-finish/assemble-finish.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Assemble design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from derui/Clairink
2- 2 layers252.6 × 80.8 mm
Similar boards
- 2 layers100 × 84 mm
Cyclope
RICCIARDI-Adrien/Cyclope
Raspberry Pi powered robot with camera live stream and 360° lidar.
88 parts5MIT - 4 layers34 × 45.9 mm
- 2 layers80 × 50 mm
- 6 layers53.7 × 46.9 mm
- 4 layers40.3 × 68.8 mm
- 4 layers65 × 30 mm
- 2 layers66 × 33 mm
Esp32-s3-development board
ginomcfino/esp32-dev-board
Custom ESP32-S3 development board with USB-C, Li-ion charging, fuel gauging, 3.3 V regulation, GPIO, I2C, and onboard controls. Designed in KiCad
47 parts - 4 layers23.3 × 28.4 mm
Daronjli dongle
manhoosbilli1/esp32-bluetooth-erm-accel-dongle-faulty
ESP32 Bluetooth dongle with ERM haptic motor and accelerometer - FAULTY: wrong ORing circuit, used NMOS instead of PMOS
56 parts