

Board r1
Monorepo for awesome tools/projects/libraries
- Size
- 363 × 128 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 430
- Nets
- 249
- Pads
- 1,613
- Tracks, vias
- 2,187, 469
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Jan 2019
- Updated
- 12 Oct 2026
Overview
Board r1 is an open-source printed circuit board by dennisss, from the dennisss/dacha repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 363 × 128 mm with 430 parts on 249 nets, routed with 2,187 tracks and 469 vias.
It is built around the MDBT50-512K, 74HC595 and 24LC256-I/P, with the 1N4148W, SK6812MINI-E and DMG2305UX among its other parts. Its parts include 90 diodes, 89 switches, 25 capacitors, 10 resistors and 6 ICs. It belongs with the nRF52 and nRF5x boards of this library.
Main components
7MDBT50-512K
LCC-31LCC-31 Bluetooth Modules ROHSRAYTACBluetooth Modules74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers24LC256-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)DMG2305UX
SOT-23-55℃~+150℃ 1 P-Channel 1.7W 190pF 1V 20V 4.1A 52mΩ@4.5V 7.8nC 740pF P-Channel SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsMBR120
SOD-123Schottky DiodesDoeshare
README
README.mddacha
This is a monorepo/ecosystem of software/hardware solutions built by Dennis. Code is written primarily in Rust. Check out the partial list of what's available below.
To get started using the existing applications in this repo, follow the user guide.
Licensing
Files in this repository are licensed according to the terms in the LICENSE file though sub-directories may contains separate LICENSE files that overrule this for all files in that sub-directory.
In short, all the software is licensed under an Apache 2 license and hardware is licensed with the CERN OHL v2 Permissive license.
Components
Systems
- Cluster Orchestration : Kubernetes/Borg like containerization and service mesh solution.
- Metadata Storage : Chubby/Etcd like key-value store.
- Builder : A Bazel/Buck like dependency graph based build system.
Libraries
- Executor: Runtime for executing async futures.
- CLI Arguments Parser
- Cryptography: Suite of most common encryption/hashing/randomness algorithms. Also includes support for TLS and X.509.
- HTTP: HTTP 1/2 client/server implementation.
- RPC: gRPC compatible remote procedure call framework.
- Math: Linear algebra, optimization, geometric algorithms, big integers, etc.
- Compression
- Linux Syscall Bindings
- USB Device/Host Driver
- JSON
- Image Encoding/Decoding
- Raft : Implementation of Raft consensus and everything need to make a replicated state machine from an existing non-replicated one.
- Embedded DB : A LSM style single process database compatible with RocksDB/LevelDB.
- Graphics : A UI and rendering framework.
Compilers
- Automata / Regular Expressions
- Protobuf: Support for serialization/deserialization of Protocol Buffers either via code generation or dynamic reflection.
- ASN.1: Compiler for safe accessors and serialization/deserialization of ASN.1 messages.
- Markdown
- Skylark: Python like evaluation.
Directory Structure
Directories under this repository are used as follows:
pkg/[name](/[subname])*: First party Rust cratesdoc/: General documentation not associated with any specific packagetestdata/: Data for testing stuff underpkg/third_party/: Code and data dependencies imported from external sources (not written originally in this repository).- Code that interfaces with external services/devices may still exist in
pkg/ - As a general rule of thumb, we'd prefer to clone any dependencies into here rather than relying on package manager based vendoring.
- Code that interfaces with external services/devices may still exist in
Parts
430| Qty | Value | Footprint | References |
|---|---|---|---|
| 89 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +73 |
| 87 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | CS1, CS2, CS10, CS11, CS12, CS13, CS14, CS15, CS16, CS17, CS18, CS19, CS20, CS21, CS22, CS23 +71 |
| 87 | SK6812MINI-E | Components:SK6812MINI-E-REV | E1, E2, E10, E11, E12, E13, E14, E15, E16, E17, E18, E19, E20, E21, E22, E23 +71 |
| 72 | SW_Push | MXOnly:MXOnly-1U-Hotswap | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +56 |
| 18 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, CS88, CS89, CS90, CS91, CS92, CS93, CS94, CS95, CS96, CS97, CS100, CS101, CS102, CS103 +2 |
| 16 | SK6812MINI-E | Components:SK6812B-SIDE | E88, E89, E90, E91, E92, E93, E94, E95, E96, E97, E98, E99, E100, E101, E102, E103 |
| 8 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4, FID5, FID6, FID7, FID8 |
| 7 | SW_Push | MXOnly:MXOnly-1.25U-Hotswap | SW81, SW82, SW83, SW90, SW91, SW92, SW93 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C6 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C8, C9 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R10 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R12 |
| 2 | 2K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7 |
| 2 | 74HC595 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3, U4 |
| 2 | DMG2305 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | MXOnly:MXOnly-1.5U-Hotswap | SW33, SW46 |
| 2 | SW_Push | MXOnly:MXOnly-2.25U-Hotswap | SW61, SW65 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 100K | Resistor_SMD:R_Array_Concave_4x0603 | R13 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 10u | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7 |
| 1 | 15n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 2.2u | Inductor_SMD:L_Taiyo-Yuden_NR-24xx_HandSoldering | L3 |
| 1 | 24LC256 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U7 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x05 | Components:ADAFRUIT_MAG_CONN_5_RIGHT | J2 |
| 1 | Conn_02x03_Odd_Even | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J4 |
| 1 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LM3671-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | MBR120 | Diode_SMD:D_SOD-123 | D97 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | MDBT50-512K | Components:MDBT50-512K | U1 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPDT_PCM12 | SW63 |
| 1 | SW_Push | MXOnly:MXOnly-6.25U-Hotswap-ReversedStabilizers | SW86 |
| 1 | SW_Push | MXOnly:MXOnly-1.75U-Hotswap | SW49 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW62 |
| 1 | SW_Push | MXOnly:MXOnly-2.75U-Hotswap | SW76 |
| 1 | SW_Push | MXOnly:MXOnly-2U-Hotswap | SW30 |
More from dennisss/dacha
12- 6 layers190 × 140 mm

- 4 layers230 × 67 mm

- 6 layers32 × 32 mm

- 4 layers84 × 36 mm

- 4 layers95 × 56 mm

- 4 layers52.5 × 46.5 mm

- 4 layers52.5 × 46.5 mm

- 6 layers32 × 32 mm

- 4 layers80 × 32 mm

- 4 layers48 × 80 mm

- 6 layers32 × 32 mm

- 4 layers48 × 80 mm

Similar boards
- 2 layers53 × 50 mm

Sunmachine A3
gblach/Sunmachine-A3-pcb
The driver for WS2812, SK6812 or similar LED strips controlled via Bluetooth LE. It supports both RGB and WWA LEDs.
25 parts - 2 layers51 × 30.9 mm

- 2 layers330 × 106 mm

- 4 layers50.8 × 22.9 mm

- 4 layers93.9 × 32.3 mm

- 2 layers50.8 × 22.9 mm

Adafruit adafruit airlift featherwing pcb adafruit airlift featherwing
oomlout/oomlout_oomp_project_bot_v_2
38 parts - 2 layers81.3 × 96.5 mm

- 2 layers100 × 45 mm

Questions
How big is the Board r1 PCB?
It measures 363 × 128 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Board r1 use?
430 parts, built around the MDBT50-512K, 74HC595, 24LC256-I/P and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board r1 KiCad files?
From the dennisss/dacha repository on GitHub, at the commit this page was made from: the board is doc/keyboard/board-r1/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board r1 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).