2 layers75 × 44 mm
Iot aio
RWTH-EBC/OSIGBApp
Open-Source Internet of Things (IoT) Gateways for Building Automation Applications
46 parts3MIT
2 layers160 × 100 mm
Pv monitor
dennerlager/pv_monitor_pcb- Size
- 160 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 69
- Pads
- 221
- Tracks, vias
- 285, 12
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Aug 2023
- Updated
- 27 Aug 2023
Overview
Pv monitor is an open-source printed circuit board by dennerlager, from the dennerlager/pv_monitor_pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 160 × 100 mm with 71 parts on 69 nets, routed with 285 tracks and 12 vias.
It is built around the DMG3402L and RT424024. Its parts include 20 resistors, 12 capacitors, 8 connectors, 4 ICs and 2 diodes.
Main components
2README
README.mdpv_monitor_pcb
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 |
| 9 | ~ | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19 |
| 7 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C6, C8, C9, C10, C12 |
| 6 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R15, R16, R17, R18 |
| 3 | 2u2 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C5 |
| 3 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13, R19 |
| 2 | 100u | Capacitor_SMD:C_Elec_8x10.2 | C7, C11 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R14 |
| 2 | 150k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 2 | DMG3402L | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11 |
| 2 | RT424024 | Relay_THT:Relay_DPDT_Schrack-RT2-FormC_RM5mm | K1, K2 |
| 2 | SMAZ12-13-F | Diode_SMD:D_SMA_Handsoldering | D3, D4 |
| 1 | 120k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 130k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 1k | Potentiometer_THT:Potentiometer_Piher_PT-10-V10_Vertical | RV1 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 47R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | LM73 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | Raspberry_Pi_2_3 | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J7 |
| 1 | balancer | TerminalBlock_WAGO:TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree | J6 |
| 1 | battery | TerminalBlock_WAGO:TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree | J3 |
| 1 | cell in current | TerminalBlock_WAGO:TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree | J2 |
| 1 | cell out current | TerminalBlock_WAGO:TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree | J1 |
| 1 | heating | TerminalBlock_WAGO:TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree | J5 |
| 1 | spare | TerminalBlock_WAGO:TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree | J4 |
| 1 | trip_rcd | TerminalBlock_WAGO:TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree | J8 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | JP1 |
| 1 | ~ | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | ~ | Package_TO_SOT_SMD:Texas_NDW-7_TabPin4 | U4 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23-8_Handsoldering | U1 |
Similar boards
- 2 layers184 × 80.5 mm
Prometheus PCB
TheContrappostoShop/Apollo
Control Board for the Prometheus mSLA Printer.
129 parts13CERN-OHL-S-2.0 - 2 layers79 × 89.5 mm
- 4 layers60 × 89.5 mm
- 2 layers231.8 × 98.9 mm
- 2 layers80 × 43 mm
- 4 layers160 × 106 mm
- 4 layers160 × 106 mm
Questions
How big is the Pv monitor PCB?
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pv monitor use?
71 parts, built around the DMG3402L and RT424024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pv monitor KiCad files?
From the dennerlager/pv_monitor_pcb repository on GitHub, at the commit this page was made from: the board is pv_monitor.kicad_pcb and its schematic pv_monitor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pv monitor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).