4 layers100 × 84 mm
4 layers88 × 50 mm
Node Controller
demeter-hydroponics/demeter-boardsAll EE related files will be here
- Size
- 88 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 72
- Pads
- 281
- Tracks, vias
- 354, 378
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Nov 2024
- Updated
- 22 Jan 2025
Overview
Node Controller is an open-source printed circuit board by demeter-hydroponics, from the demeter-hydroponics/demeter-boards repository on GitHub. It is a 4-layer board of 88 × 50 mm with 101 parts on 72 nets, routed with 354 tracks and 378 vias.
It is built around the ESP32-MINI-1, DMN3404L and B4B-XH-AM-BK, with the QTLP601CRTR, B5B-XH-AM and EAST1616RGBB2 among its other parts. Its parts include 43 resistors, 18 capacitors, 7 transistors, 7 connectors and 5 ICs. It belongs with the ESP32 boards of this library.
Main components
6ESP32-MINI-1
SMDSMD New Arrivals ROHSEspressif SystemsUncategorised
DMN3404L
SOT-23-55℃~+150℃ 1 N-channel 1V 29pF 305pF 30V 38mΩ@10V 3nC 5A 65pF 750mW N-Channel ±20V SOT-23 MOSFETs ROHSYTLMOSFETs
B4B-XH-AM-BK
插件,P=2.5mm-25℃~+85℃ 1 12.4mm 1x4P 2.5mm 250V 3A 4 4P 5.75mm 7mm Black Brass K Pin、With post PA66 Through Hole Tin UL94V-0 XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
QTLP601CRTR
0603LED Indication - DiscreteEverlight Electronics
B5B-XH-AM
插件,P=2.5mm-25℃~+85℃ 1 14.9mm 1x5P 2.5mm 250V 3A 5 5.75mm 5P 7mm Brass K Pin、With post PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board ConnectorEAST1616RGBB2
SMD-4P,1.6x1.6mm120° Common Anode White Lens SMD-4P,1.6x1.6mm RGB LEDs ROHSEverlight ElectronicsRGB LEDs
README
README.mddemeter-boards
This is where all the EE related files will go into
All the board data has been stored in these files. Updates will be made and pushed with commit messages Calculations and other documents will remain on OneDrive
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10kR | Resistor_SMD:R_0603_1608Metric | R8, R36, R47, R48, R50, R53, R54, R55, R56, R58, R59, R60, R61, R62, R63, R64 |
| 12 | 0R | Resistor_SMD:R_0603_1608Metric | R2, R3, R6, R7, R9, R10, R11, R31, R34, R35, R42, R45 |
| 10 | ~ | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP4, TP5, TP6, TP20, TP21, TP22, TP23, TP24 |
| 8 | 100nF | Capacitor_SMD:C_1206_3216Metric | C6, C10, C14, C17, C18, C19, C23, C24 |
| 5 | DMN3404L | Package_TO_SOT_SMD:SOT-23 | Q1, Q7, Q12, Q13, Q14 |
| 4 | 2.2uF | Capacitor_SMD:C_1206_3216Metric | C7, C8, C9, C11 |
| 4 | 2R | Resistor_SMD:R_0402_1005Metric | R4, R5, R32, R33 |
| 4 | 330R | Resistor_SMD:R_0402_1005Metric | R43, R51, R52, R57 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_1210_3225Metric | C12, C13, C15 |
| 3 | XT30 | DEMETER_LIB:XT30 | J2, J8, J9 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C5 |
| 2 | 10mR | Resistor_SMD:R_0805_2012Metric | R1, R29 |
| 2 | 20kR | Resistor_SMD:R_0402_1005Metric | R39, R41 |
| 2 | B4B-XH-AM | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J11, J12 |
| 2 | BC817-25LT1G | Package_TO_SOT_SMD:SOT-23 | Q10, Q11 |
| 2 | INA181 | Package_TO_SOT_SMD:SOT-23-6 | U1, U6 |
| 2 | PTS526SK15SMTR2 LFS | DEMETER_LIB:PTS526SK15SMTR2 LFS | SW1, SW2 |
| 2 | QTLP601CRTR | LED_SMD:LED_0603_1608Metric | D7, D8 |
| 1 | 105kR | Resistor_SMD:R_0402_1005Metric | R40 |
| 1 | 127kR | Resistor_SMD:R_0402_1005Metric | R38 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric | C16 |
| 1 | 22uH | Inductor_SMD:L_Bourns-SRN8040_8x8.15mm | L1 |
| 1 | 4.7kR | Resistor_SMD:R_0603_1608Metric | R44 |
| 1 | B5B-XH-AM | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J1 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J3 |
| 1 | EAST1616RGBB2 | DEMETER_LIB:EAST1616RGBB2 | D9 |
| 1 | ESP32-MINI-1 | DEMETER_LIB:ESP32-MINI-1 | U11 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U9 |
| 1 | LMR54406FDBVR | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | LOGO | LOGO | G*** |
Questions
How big is the Node Controller PCB?
It measures 88 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Node Controller use?
101 parts, built around the ESP32-MINI-1, DMN3404L, B4B-XH-AM-BK and QTLP601CRTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Node Controller KiCad files?
From the demeter-hydroponics/demeter-boards repository on GitHub, at the commit this page was made from: the board is Node Controller/Node Controller.kicad_pcb and its schematic Column Controller V2/Block_Diagram.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Node Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask demeter-hydroponics before reusing the design.
More from demeter-hydroponics/demeter-boards
5- 4 layers80 × 46 mm
- 4 layers44 × 28 mm
- 4 layers34 × 32 mm
- 4 layers26 × 28 mm
Similar boards
- 8 layers300 × 120 mm
BenchyMotherBoard AM625
Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!
1,054 parts2AGPL-3.0 - 4 layers101.3 × 50.5 mm
ESP32 sensor board
Ankithkumarsingh/ESP32-custom-sensor-board
This PCB contains the power supply unit, ESP32 module as compute, microphone sensor, light sensing sensor, SDCard module for data logging.
94 parts1 - 4 layers88.6 × 55.6 mm
ESP32 4 layers
riteshsalikeripatil/ESP32-IoT-Development-Board
Custom ESP32 IoT Development Board designed in KiCad.
95 parts1MIT - 4 layers
LumiCtrl
saeedniko/LumiCtrl
Hardware and firmware design for controlling LED strips using an ESP32 microcontroller. Includes circuit design, PCB layout, and software for lighting effects and control.
138 partsGPL-3.0 - 6 layers60.6 × 100 mm
Gecko5education
logisim-evolution/GECKO5Education
Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education
311 parts18MIT - 2 layers62.5 × 32 mm
- 4 layers64.8 × 18 mm
Corncob
aswild/corncob
Corncob is an adapter to run standard 12V PWM computer fans off of a USB power source. It boosts 5V or 9V USB-PD power to 12V and outputs a PWM control signal.
51 parts - 4 layers41.4 × 27.9 mm
Imu geolocator
gabrielpgagne/imu-geolocator-hw
An experimental project about trying to use an IMU as a geolocalization device.
34 partsGPL-3.0