2 layers31.5 × 96.7 mm
4 layers45 × 63.5 mm
Redshift
Dekanova/redshift3This is the central repository for work on the Redshift PCB.
- Size
- 45 × 63.5 mm
- Copper layers
- 4
- Thickness
- 1.69 mm
- Parts
- 77
- Nets
- 97
- Pads
- 295
- Tracks, vias
- 643, 108
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 Nov 2021
- Updated
- 4 Aug 2023
Overview
Redshift is an open-source printed circuit board by Dekanova, from the Dekanova/redshift repository on GitHub. It is a 4-layer board of 45 × 63.5 mm with 77 parts on 97 nets, routed with 643 tracks and 108 vias.
It is built around the LPC5526JEV98, MIC5365-3.3YC5-TR and 1.0T-5P立贴, with the DZ200R-11-06-39, PRTR5V0U2X and PTS810 among its other parts. Its parts include 25 capacitors, 9 resistors, 6 diodes, 4 ICs and 4 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
6LPC5526JEV98
UncategorisedNXP Semiconductors
MIC5365-3.3YC5-TR
SC-70-5-40℃~+125℃ 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 65dB@(10kHz)、80dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1.0T-5P立贴
SMD,P=1mm1 1mm 1x5P 2.9mm 4.5mm 5 5P Beige SH Surface Mount,Vertical SMD,P=1mm Wire To Board Connector ROHSBOOMELEWire To Board Connector
DZ200R-11-06-39
插件,P=2mm1 1.5A 1x6P 2.8mm 2mm 2mm 3.9mm 6P Black Brass Gold Pin Header Through Hole 插件,P=2mm Pin Headers ROHSDEALONPin Headers
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
PTS810
UncategorisedC&K
README
README.mdRedshift
This is the central repository for work on the Redshift PCB.
Features
- 8kHz polling (USB 2.0 HighSpeed)
- usb-C port
- PAW 3399
Usage
- KiCad 6.0+ must be installed
- Openinput library from kicad content&lib manager in KiCad
NOTE: Encoder 3d file is intentionally not included. If you wish to add it, models are freely downloaded from Alps Alpine website under EC10E.
Board Notes
- If connecting USB and debug connectors at the same time, ensure debug supply voltage is under 5v. (some JTAG debuggers have this) 5v supply from debug pins are OK as long as USB is unplugged.
- PcbNew grid size used is 0.1mm
Credits
A huge thanks to openinput for their generic KiCad lib, as well as their fully developed PCBs which this PCB is largely based off of.
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18 +2 |
| 14 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C9, C12, C16, C17, C19, C21, C24 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R8, R13 |
| 4 | 22uF | Capacitor_SMD:C_0603_1608Metric | C11, C14, C20, C25 |
| 3 | SW_SP | openinput:SW_Micro_Switch | SW1, SW2, SW3 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 8pF | Capacitor_SMD:C_0402_1005Metric | C15, C23 |
| 2 | RED | LED_SMD:LED_0402_1005Metric | D2, D6 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 13 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 47pF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 4u7H | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 500mA | Fuse:Fuse_0402_1005Metric | F1 |
| 1 | 600@100Mhz | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | AMBER | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | C145962 | Connector_JST:JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | J2 |
| 1 | C2935905 | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J3 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J4 |
| 1 | G*** | kibuzzard-63789540 | kibuzzard-63789540 |
| 1 | G*** | kibuzzard-637894B3 | kibuzzard-637894B3 |
| 1 | G-Switch GT-USB-7010ASV | GCT_USB:GCT_USB4105-GF-A | J1 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | LPC5526JEV98 | solokeys:BGA98C50P13X13_700X700X97N | IC1 |
| 1 | MIC5365-3.3YC5-TR | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | NSR05F40NXT5G | Diode_SMD:D_0402_1005Metric | D7 |
| 1 | PAW3399DM‐T4QU | openinput:PXI-DIP-16 | U1 |
| 1 | PRTR5V0U2X | footprints:BF994S | D1 |
| 1 | PTS810 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW4 |
| 1 | Rotary_Encoder | openinput:RotaryEncoder_Horizontal | ENC1 |
| 1 | Seiko Epson Q22FA12800400 | Seiko Epson Q22FA12800400:Seiko Epson Q22FA12800400 | Y1 |
| 1 | Texas Instruments TLV70028DDCR | Package_TO_SOT_SMD:SOT-23-5 | U3 |
Questions
How big is the Redshift PCB?
It measures 45 × 63.5 mm and has 4 copper layers, 1.69 mm thick.
What parts does the Redshift use?
77 parts, built around the LPC5526JEV98, MIC5365-3.3YC5-TR, 1.0T-5P立贴 and DZ200R-11-06-39. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Redshift KiCad files?
From the Dekanova/redshift repository on GitHub, at the commit this page was made from: the board is pcb/redshift.kicad_pcb and its schematic pcb/redshift.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Redshift design in my own project?
Its repository states no licence, so its author keeps all rights: ask Dekanova before reusing the design.
Similar boards
- 2 layers70.3 × 38 mm
JABICAN USB Pro
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
92 parts14Apache-2.0 - 2 layers33 × 13 mm
- 4 layers76.7 × 44.5 mm
- 2 layers77.5 × 118.1 mm
Tenkey plusplus
jonbobcar/tenkey_plusplus
Tenkey++ is a QMK powered, OSHW, USB-C connected, hotswapable numpad.
79 parts4 - 2 layers99.1 × 84.8 mm
Frdm05-devboard
M-Skut/kl05z-devboard-demo
Firmware + hardware for KL05Z Development Board Add-on
71 parts1 - 2 layers95.3 × 72.4 mm
Rck22
Muriukidavid/reflow_toaster_oven
Design for a home toaster oven reflow based on tinyk22 module
81 parts1 - 4 layers30 × 40 mm
