
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Lasercut Challenge
Sensor is an open-source printed circuit board by DefProc, from the DefProc/mfuklc repository on GitHub. It is a 2-layer board of 100 × 91.5 mm with 35 parts on 3 nets, routed with 105 tracks and 0 vias.
It belongs with the sensors and measurement boards of this library.
Although the nerf range project was successful, it turned out that there was little interest in the competative building portion of this project. On the upside, the range had 5 installs during 2015, with hundreds of excited players during that time.
So although the MFUKLC project (it's a terrible acronym) has now reached it's conclusion, the same technology (with upgrades like full colour, animated, LED targets) lives on as Made Invaders.
DefProc, 2016
Your challenge, should you choose to accept it, is to build a device that can propel small light weight projectiles against a target.
Round 1: MakerFaire UK 2015 (25-26 April Newcastle) MakerFaire UK.
Round 2: MakeFest Liverpool 2015 (27th June, Central Library, Liverpool) LpoolMakeFest.
Round 3: MakeFest Manchester 2015 (8–9th August, MOSI, Manchester) MakeFest.
Round 4: Oggcamp '16
Take a look at the rules to find out what you need to do. You can be a part of this challenge, either by entering at an event where the target will be, or by running your own event wherever and whenever you choose.
Entries are now open to participate at Maker Faire UK 2015
If you'd like to participate or have additional questions contact @defproc or @MFUKLC. Along with coming to Maker Faire UK in April 2015, we will also ask for:
If you'd like to follow each teams progress and enjoy the trash talking follow the hash tag #MFUKLC "Mega Fun United Kingdom Laser Challenge" or follow the twitter account @MFUKLC to see @replies for the challenge in your timeline.
Although this activity is running at the Maker Faire UK event, it is in no way affiliated with either Maker Faire UK or Make Media. It's an event being run by exhibitors at Maker Faire UK.
Short link to this repository.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | SHOTTKY DIODE SR1100 | SCHKY1 | SCHKY, SCHKY, SCHKY, SCHKY, SCHKY, SCHKY, SCHKY, SCHKY, SCHKY, SCHKY |
| 5 | 1M | R3 | R1, R1, R1, R1, R1 |
| 5 | 4.7nF | C1-2 | 4.7nF, 4.7nF, 4.7nF, 4.7nF, 4.7nF |
| 5 | CONN_2 | PZ1 | CONN, CONN, CONN, CONN, CONN |
| 5 | PIEZO | PZ2 | PIEZO, PIEZO, PIEZO, PIEZO, PIEZO |
| 5 | ZENER DIODE 1N751A | D3-REV | Z 5.1V, Z 5.1V, Z 5.1V, Z 5.1V, Z 5.1V |
It measures 100 × 91.5 mm and has 2 copper layers, 1.6 mm thick.
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DefProc/mfuklc repository on GitHub, at the commit this page was made from: the board is range/sensor/sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DefProc before reusing the design.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.



