
MQ Breakout
SolderedElectronics/Air-quality-sensor-MQ135-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Air-quality-sensor-MQ135-breakout designed by Soldered Electronics.

Air poll is an open-source printed circuit board by DeeptamBhar, from the DeeptamBhar/air_poll repository on GitHub, published under the MIT licence. It is a 2-layer board of 22 × 38 mm with 39 parts on 9 nets, routed with 51 tracks and 11 vias.
It is built around the LM393 and TC33X-2-103E. Its parts include 4 resistors, 2 capacitors, 2 ICs, 1 diode and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | buzzardLabel | , , , , , , , , , , , , , , , +5 | |
| 2 | 0.1uF | e-radionica.com footprinti:0603C | C1, C2 |
| 2 | 10k | e-radionica.com footprinti:0603R | R1, R3 |
| 2 | HOLE_3.2mm | e-radionica.com footprinti:HOLE_3.2mm | H1, H2 |
| 1 | 2k2 | e-radionica.com footprinti:0402R | R4 |
| 1 | FIDUCIAL | e-radionica.com footprinti:FIDUCIAL_23 | FD1 |
| 1 | HEADER_MALE_4X1 | e-radionica.com footprinti:HEADER_MALE_4X1 | K1 |
| 1 | LM393 | e-radionica.com footprinti:SOIC−8 | U2 |
| 1 | LOGO | Soldered Graphics:Logo-Front-Soldered-4mm | G*** |
| 1 | LOGO | Soldered Graphics:Logo-Back-OSH-3.5mm | G*** |
| 1 | LOGO | Soldered Graphics:Symbol-Front-Air-Quality | G*** |
| 1 | MQ-X | e-radionica.com footprinti:MQ | U1 |
| 1 | TC33X-2-103E | e-radionica.com footprinti:tc33x-2-103e | R2 |
| 1 | purple | e-radionica.com footprinti:0402LED | D1 |
The 37 most common of 39 parts.

SolderedElectronics/Air-quality-sensor-MQ135-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Air-quality-sensor-MQ135-breakout designed by Soldered Electronics.

SolderedElectronics/Obstacle-sensor-with-easyC-hardware-design
Hardware design, BOM, gerbers and 3D files for Obstacle-sensor-with-easyC designed by Soldered Electronics.

SolderedElectronics/Simple-light-sensor-board-qwiic-hardware-design
Hardware design, BOM, gerbers and 3D files for Simple-light-sensor-board-qwiic designed by Soldered Electronics.



SolderedElectronics/Capacitive-soil-sensor-hardware-design
Hardware design, BOM, gerbers and 3D files for Capacitive-soil-sensor designed by Soldered Electronics.

mignon-p/butterfly-hw
KiCad and Gerber files for a nightlight shaped like a butterfly.

It measures 22 × 38 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the LM393 and TC33X-2-103E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DeeptamBhar/air_poll repository on GitHub, at the commit this page was made from: the board is pcb/air_poll.kicad_pcb and its schematic pcb/air_poll.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).