
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

PCB (and possibly other things)
Display is an open-source printed circuit board by deepestcyber, from the deepestcyber/mini-tetris-wall repository on GitHub. It is a 2-layer board of 273.1 × 90 mm with 22 parts on 83 nets, routed with 395 tracks and 19 vias.
It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Mainly the PCB design (WIP)
Example:

Wir sollten den von KiCAD gedachten Weg nehmen, und mit den Schematics anfangen. Damit haben wir dann auch zumindest eine Plausibilitätsprüfung für's Netz.
Idee für die Platine: vergrößern auf die Außenmaße des unteren Rahmens (der Kasten für die Elektronik), Bohrlöcher mit vorsehen. Dann können wir es direkt mit dem Rest verschrauben. Aufpassen, dass im Rand kein Metall in den Layern ist, um elektrisch von außen getrennt zu bleiben! Daten für Größe könnte man vermutlich aus den Laserdaten nehmen. Nachteil: Platine ist nur befestigt, wenn der Rahmen zu ist.
Ich höre, JLCPCB macht einseitige Bestückung für Bauteile, die sie haben. Da wir nur Stift- und Buchsenleisten haben, könnte das was werden.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Mega2560_Shield_redux | Arduino:Arduino_Mega2560_Shield | XA1 |
| 1 | GND | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | GND |
| 1 | LED Strip 0 | display:strip_connector_hole | LS0 |
| 1 | LED Strip 1 | display:strip_connector_hole | LS1 |
| 1 | LED Strip 2 | display:strip_connector_hole | LS2 |
| 1 | LED Strip 3 | display:strip_connector_hole | LS3 |
| 1 | LED Strip 4 | display:strip_connector_hole | LS4 |
| 1 | LED Strip 5 | display:strip_connector_hole | LS5 |
| 1 | LED Strip 6 | display:strip_connector_hole | LS6 |
| 1 | LED Strip 7 | display:strip_connector_hole | LS7 |
| 1 | LED Strip 8 | display:strip_connector_hole | LS8 |
| 1 | LED Strip 9 | display:strip_connector_hole | LS9 |
| 1 | LED Strip A | display:strip_connector_hole | LS10 |
| 1 | LED Strip B | display:strip_connector_hole | LS11 |
| 1 | LED Strip C | display:strip_connector_hole | LS12 |
| 1 | LED Strip D | display:strip_connector_hole | LS13 |
| 1 | LED Strip E | display:strip_connector_hole | LS14 |
| 1 | LED Strip F | display:strip_connector_hole | LS15 |
| 1 | Raspberry Pi | Arduino:raspberrypi_2_3 | J1 |
| 1 | VCC | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | VCC |
The 20 most common of 22 parts.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 273.1 × 90 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the deepestcyber/mini-tetris-wall repository on GitHub, at the commit this page was made from: the board is display/display.kicad_pcb and its schematic display/display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask deepestcyber before reusing the design.