Skip to the content
2 layers109 × 31 mmProtection, the printed circuit board in 3D

Hardware and firmware for a bidirectional DC-DC convertor

Size
109 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
4
Pads
24
Tracks, vias
0, 50
Pours
4
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
5 Nov 2025
Updated
4 Aug 2026

Overview

Protection is an open-source printed circuit board by ddowling, from the ddowling/BidirectionalSupply repository on GitHub. It is a 2-layer board of 109 × 31 mm with 13 parts on 4 nets.

It is built around the RL1210A390K and ACM1513-551-2PL-TLHF. Its parts include 5 capacitors, 2 connectors, 1 IC and 1 inductor. It belongs with the power boards of this library.

Main components

2

README

README.md

This is a design for a Bidirectional Buck-Boost DC-DC converter based on the Texas Instruments BQ25758 integrated circuit. The BQ25758 has a wide supply range from 4.2V to 60V and the external MOSFETs and Inductor should support currents up to 10A. This design is closely based on the BQ25758 Evaluation Module. I decided to spin my own board as I wanted to add a microcontroller and four Ideal Diodes with load switches to make a completely standalone board.

I am interested in using this circuit as a DC UPS, Battery Charger and Solar MPPT. I have used various purpose build modules previously but I have often run into limitations due to their fixed function design and closed firmware.

The BQ25758 I2C interface is connected to an on-board RP2350 and there are 4 Ideal-Diode switches also connected to the RB2350. All of the high current connections are brought out to pluggable terminal blocks so it is possible to reconfigure the circuit to accomodate different use cases. Having the ability to switch the DC-DC converter direction means that the system bus voltage can be decoupled from the battery voltage.

I was originally going to use a STM32 for the board microcontroller as I have used these on a lot of previous designed but when I started looking at battery capacity tracking algorithms I noted that the more advanced employed an Unsented Kalman Filter and required the use of an Equivalent Circuit Model for the battery. I decided to opt for the RP2350 with its hardware floating point and the ability to run MicroPython as I figure this will be easier to iterate the firmware and run experiments on the board. Using MicroPython allow writing log files to the flash memory to allow continous logging of battery voltage, current and temperature. This data can then be processed either on the board or remotely to allow a battery model to be fitted to actual battery performance.

Parts

13
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
210uF/100VWCapacitor_SMD:C_1210_3225MetricC2, C4
256uF/80VWCapacitor_SMD:CP_Elec_10x10.5C1, C3
2Conn_01x02Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_VerticalJ1, J2
1100nF/100VWCapacitor_SMD:C_1206_3216MetricC5
1ACM1513-551-2PL-TLHFprotection:FILTER-SMD_4P-L15.0-W13.0-BLL1
1RL1210A390Kprotection:R1210U1

More from ddowling/BidirectionalSupply

1
  • 4 layers132 × 107 mmBidirectionalSupply, the printed circuit board in 3D

    BidirectionalSupply

    ddowling/BidirectionalSupply

    Hardware and firmware for a bidirectional DC-DC convertor

    278 parts2

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Protection PCB?

It measures 109 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Protection use?

13 parts, built around the RL1210A390K and ACM1513-551-2PL-TLHF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Protection KiCad files?

From the ddowling/BidirectionalSupply repository on GitHub, at the commit this page was made from: the board is protection/protection.kicad_pcb and its schematic hardware/BidirectionalSupply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Protection design in my own project?

Its repository states no licence, so its author keeps all rights: ask ddowling before reusing the design.