
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

Contains KiCad files, README, and QMK Firmware for MyCroPad.
HackPad Schematic PCB 1.1 is an open-source printed circuit board by db34-eng, from the db34-eng/MyCroPad repository on GitHub, published under the MIT licence. It is a 2-layer board of 92 × 84.5 mm with 33 parts on 18 nets, routed with 116 tracks and 0 vias.
Its parts include 10 switches, 9 diodes and 2 ICs.
A 9-key matrix with a rotary encoder and an OLED screen, created for gaming.
Check out my PCB & try it out here: https://kicanvas.org/?repo=https%3A%2F%2Fgithub.com%2Fdb34-eng%2FMyCroPad-
Check out my case here: https://autode.sk/452PsHg
Thanks to everyone in the #hackpad slack for helping answer my many questions and teaching me when I didn't understand. Specific thank-yous to:
Thank you all for your help, I couldn't have done it without you! Also, this project was created for the Stardance challenge. Check it out here: https://stardance.hackclub.com/home
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 9 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 1 | ER_OLEDM0.91_1x-I2C | OLED Screen:SSD1306-0.91-OLED-4pin-128x32 | U2 |
| 1 | MOUDLE-SEEEDUINO-XIAO | footprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW10 |
The 32 most common of 33 parts.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 92 × 84.5 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the db34-eng/MyCroPad repository on GitHub, at the commit this page was made from: the board is PCB/HackPad Schematic PCB 1.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).