Skip to the content
2 layers92 × 84.5 mmHackPad Schematic PCB 1.1, the printed circuit board in 3D

HackPad Schematic PCB 1.1

db34-eng/MyCroPad

Contains KiCad files, README, and QMK Firmware for MyCroPad.

Size
92 × 84.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
18
Pads
88
Tracks, vias
116, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Jul 2026
Updated
17 Jul 2026

Overview

HackPad Schematic PCB 1.1 is an open-source printed circuit board by db34-eng, from the db34-eng/MyCroPad repository on GitHub, published under the MIT licence. It is a 2-layer board of 92 × 84.5 mm with 33 parts on 18 nets, routed with 116 tracks and 0 vias.

Its parts include 10 switches, 9 diodes and 2 ICs.

README

README.md

MyCroPad-

A 9-key matrix with a rotary encoder and an OLED screen, created for gaming.

PCB

image

Case

image

Check out my PCB & try it out here: https://kicanvas.org/?repo=https%3A%2F%2Fgithub.com%2Fdb34-eng%2FMyCroPad-

Check out my case here: https://autode.sk/452PsHg

Features-

  • A 3x3 9x Key Matrix
  • 1x OLED Screen
  • 1x Rotary Encoder Switch
  • All controlled by a XIAO Seeed Studio Seeeduino
  • Designed for gaming, OLED screen provides visual feedback for buttons pressed, and Rotary Encoder provides finer control over movement.
  • All on a custom, designed by me, PCB (linked above)
  • A 3d printed case
  • Running on custom designed QMK firmware

How it works-

  • 9 key inputs & 2 directions from Rotary Encoder travel through PCB to the Seeeduino, which sends the signal to the connected computer, and shows an animation on the OLED screen.
  • Will be updated once QMK firmware is completed

How to do it yourself:

  • If you want to copy my design, go ahead, as long as you follow the rules in License.
  1. Download all files in this repository (IT IS NOT COMPLETE YET. THIS WILL BE UPDATED AND REMOVED IN THE FUTURE(QMK FILES NOT COMPLETED))
  2. Get your parts - Get all the parts in the Bill Of Materials
  3. 3d Print the case - Use the STEP file and a STEP File Converter (found on google) to change it to the file type your computer uses OR if you have Fusion, open the Fusion file and click File -> Export and choose the file type needed.
  4. Manufacture the PCB - Grab the PCB files, boot up KiCad, and edit them if desired. Then, when in the PCB viewer, click File -> Fabrication Outputs -> and choose your desired file type. Then, upload this file to a PCB manufacturer of your choice. (Costs money btw $$$)
  5. Assemble the unit
  6. Use the QMK firmware to make the keyboard work
  7. Have fun with your new MacroPad!!!

Credits-

Thanks to everyone in the #hackpad slack for helping answer my many questions and teaching me when I didn't understand. Specific thank-yous to:

  • Pixelated Carlisle

  • arthihalder

  • CharlieCatMeow

  • mountnrocky

  • hww

  • yassin

  • dominic.stange13

  • codecraft07

Thank you all for your help, I couldn't have done it without you! Also, this project was created for the Stardance challenge. Check it out here: https://stardance.hackclub.com/home

Parts

33
QtyValueFootprintReferences
11LOGOLOGOG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***
91N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D9
9SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9
1ER_OLEDM0.91_1x-I2COLED Screen:SSD1306-0.91-OLED-4pin-128x32U2
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW10

The 32 most common of 33 parts.

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the HackPad Schematic PCB 1.1 PCB?

It measures 92 × 84.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HackPad Schematic PCB 1.1 use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HackPad Schematic PCB 1.1 KiCad files?

From the db34-eng/MyCroPad repository on GitHub, at the commit this page was made from: the board is PCB/HackPad Schematic PCB 1.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the HackPad Schematic PCB 1.1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).