Skip to the content
2 layers16.2 × 20 mmPhoenix adapter downwards, the printed circuit board in 3D

A simple PCB to intercace stereo audio jacks to a phoenix audio connector

Size
16.2 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
3
Pads
3
Tracks, vias
20, 5
Pours
10
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Mar 2018
Updated
12 Oct 2019

Overview

Phoenix adapter downwards is an open-source printed circuit board by db-electronics, from the db-electronics/phoenix-audio-adapter-kicad repository on GitHub. It is a 2-layer board of 16.2 × 20 mm with 2 parts on 3 nets, routed with 20 tracks and 5 vias.

It is built around the RCJ-2223. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

Copyright and Disclaimer

Copyright: René Richard

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

Phoenix Audio Adapter

I didn't want to have a bunch of stripped wire connectors on my Extron Crosspoint 12x4 video switch so I decided to make this simple adapter which allows a stacked RCA stereo audio jack (Digikey# CP-1435-ND) to be interfaced to a standard 5pin 3.5mm Phoenix connector.

Output Differences

The Extron Audio output wiring is different than the input wiring. There are 2 PCBs in this project. Be sure to use the output PCB for your outputs!

Phoenix Adapter

This folder contains a PCB which connects L- and R-. You "can" use this PCB for all your needs, provided you cut the R- and L- traces for outputs. If you forget to cut the traces it's probably not a big deal since there is internal resistance (50 ohms or so) in line which each output. Obviously best if they are cut, but not catastrophic by any means.

Phoenix Adapter Output

This folder contains a PCB which leaves L- and R- floating.

Parts

2
QtyValueFootprintReferences
1LOGOdb-artwork:db-logo_7.5mmG***
1RCJ-2223db-thparts:RCJ-2223CON101

More from db-electronics/phoenix-audio-adapter-kicad

3
  • 2 layers16.2 × 20 mmPhoenix adapter, the printed circuit board in 3D

    Phoenix adapter

    db-electronics/phoenix-audio-adapter-kicad

    A simple PCB to intercace stereo audio jacks to a phoenix audio connector

    2 parts12
  • 2 layers16.2 × 20 mmPhoenix adapter downwards, the printed circuit board in 3D

    Phoenix adapter downwards

    db-electronics/phoenix-audio-adapter-kicad

    A simple PCB to intercace stereo audio jacks to a phoenix audio connector

    2 parts12
  • 2 layers16.2 × 20 mmPhoenix adapter, the printed circuit board in 3D

    Phoenix adapter

    db-electronics/phoenix-audio-adapter-kicad

    A simple PCB to intercace stereo audio jacks to a phoenix audio connector

    2 parts12

Similar boards

  • 4 layers178 × 99 mmFreeDSP OCTAVIA, the printed circuit board in 3D

    FreeDSP OCTAVIA

    freeDSP/freeDSP-OCTAVIA

    8ch Output ADAU1452/1466 DSP Board with Analog/COAX/OPT/USB/Raspberry-Pi Input

    529 parts19CC-BY-SA-4.0
  • 6 layers42.5 × 54.5 mmAudioBridge-411, the printed circuit board in 3D

    AudioBridge-411

    Laudatur/Projekty

    Układ łączy cyfrową transmisję pakietową po magistrali USB z bezstratną konwersją cyfrowo-analogową I2S, wykorzystując wbudowaną pompę ładunku przetwornika do bezpośredniego sprzężenia wyjścia audio z potencjałem masy…

    60 parts
  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0

Questions

How big is the Phoenix adapter downwards PCB?

It measures 16.2 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Phoenix adapter downwards use?

2 parts, built around the RCJ-2223. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Phoenix adapter downwards KiCad files?

From the db-electronics/phoenix-audio-adapter-kicad repository on GitHub, at the commit this page was made from: the board is phoenix-adapter-output/phoenix-adapter_downwards.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Phoenix adapter downwards design in my own project?

Its repository states no licence, so its author keeps all rights: ask db-electronics before reusing the design.