2 layers20.5 × 37.7 mm
82S1xx W27C512 Adapter
SukkoPera/OldPromAdapter
Replace 82s126/82s129/82s131 PROMs with (E)EPROMs
5 parts18
2 layers40.6 × 34 mm
Cvcart dip
db-electronics/cvcarts-kicadThis documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
- Size
- 40.6 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 31
- Pads
- 68
- Tracks, vias
- 156, 11
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Feb 2017
- Updated
- 16 Oct 2017
Overview
Cvcart dip is an open-source printed circuit board by db-electronics, from the db-electronics/cvcarts-kicad repository on GitHub. It is a 2-layer board of 40.6 × 34 mm with 6 parts on 31 nets, routed with 156 tracks and 11 vias.
It is built around the W27C512-45Z and BAT54A. Its parts include 2 diodes, 1 capacitor, 1 resistor, 1 IC and 1 connector.
Main components
2README
README.mdCopyright and Disclaimer
Copyright: René Richard
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Colecovision Cartridge
This KiCad project is a 32KB Colecovision ROM cartridge.
Parts
6Questions
How big is the Cvcart dip PCB?
It measures 40.6 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cvcart dip use?
6 parts, built around the W27C512-45Z and BAT54A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cvcart dip KiCad files?
From the db-electronics/cvcarts-kicad repository on GitHub, at the commit this page was made from: the board is cvcart-dip/cvcart-dip.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cvcart dip design in my own project?
Its repository states no licence, so its author keeps all rights: ask db-electronics before reusing the design.
Similar boards
- 2 layers254 × 160 mm
- 2 layers99.1 × 99.1 mm
QL Qsound10x10
alvaroalea/QL_QsoundQprint_clone
A clone board of the Sound card for the Sinclair QL Computer.
23 parts11 - 2 layers99.7 × 149.9 mm
- 2 layers40.6 × 44.5 mm
QL Minerva MK2
alvaroalea/QL_Minerva_MK2
Clone of the Board of ROM + RTC for Sinclair QL Computer
16 parts6 - 2 layers101.6 × 65.3 mm
Msx eprom cartridge 3.1
msx-solis/MSX-EEPROM-Cartridge-64k-v3
Simple MSX ROM cartridge up to 64k
10 parts6 - 2 layers450 × 130 mm
Robotron
radiolok/robotron_s6130
All about Robotron S6130 Daisy Wheel typewriter
201 parts6BSD-2-Clause - 2 layers
