Skip to the content
6 layers36.5 × 33 mmOrologio, the printed circuit board in 3D

A wearable fitness tracker

Size
36.5 × 33 mm
Copper layers
6
Thickness
1.6 mm
Parts
81
Nets
85
Pads
334
Tracks, vias
751, 120
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Sep 2026
Updated
15 Sep 2026

Overview

Orologio is an open-source printed circuit board by dayve22, from the dayve22/fitness-tracker repository on GitHub. It is a 6-layer board of 36.5 × 33 mm with 81 parts on 85 nets, routed with 751 tracks and 120 vias.

It is built around the MAX30102, MLX90632SLD-DCB-100-RE and BMI323, with the SR1HARU, TPD6E05U06RVZR and TXB0304RUT among its other parts. Its parts include 34 capacitors, 20 resistors, 10 ICs, 4 switches and 3 connectors. It belongs with the wearables boards and the STM32 boards of this library.

Main components

9

README

README.md

Watch fitness tracker

DISCLAIMER: This is a personal learning project not a finished product

This is a work in progress, it is not complete, a lot of functionality is missing. The final version will be a watch that tracks heart rate, spO2, skin temperature and counts steps without bluetooth or wireless connection. The data is saved on the watch and can be downloaded via USB-C. For now it can track steps and skin temperature, and of course keep time.

Project structure

There are two main folders, hardware and fitness-tracker. Inside the hardware folder there is the kicad project with the schematic and pcb layout. The pcb layout is missing some changes I have added later and the lcd connector is flipped for my use case but works. Inside the fitness-tracker folder there is the stm32CubeIDE and stm32CubeMX project with all the firmware.

Parts

81
QtyValueFootprintReferences
16100nCapacitor_SMD:C_0402_1005MetricC3, C6, C7, C10, C12, C14, C15, C19, C20, C24, C25, C26, C30, C31, C32, C33
6100kResistor_SMD:R_0402_1005MetricR8, R10, R16, R17, R18, R20
610uCapacitor_SMD:C_0805_2012MetricC4, C17, C18, C21, C22, C34
55k1Resistor_SMD:R_0402_1005MetricR4, R6, R14, R15, R19
4CCapacitor_SMD:C_0402_1005MetricC1, C2, C5, C8
4SW_PushButton_Switch_SMD:SW_SPST_EVQP7ASW1, SW2, SW3, SW4
310kResistor_SMD:R_0402_1005MetricR7, R11, R12
31uCapacitor_SMD:C_0402_1005MetricC16, C28, C29
34.7uCapacitor_SMD:C_0402_1005MetricC9, C11, C13
20Resistor_SMD:R_0402_1005MetricR3, R5
282kResistor_SMD:R_0402_1005MetricR1, R9
110nCapacitor_SMD:C_0402_1005MetricC23
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11N4148WTDiode_SMD:D_SOD-523D2
11kResistor_SMD:R_0402_1005MetricR13
132.768KHzCrystal:Crystal_SMD_2012-2Pin_2.0x1.2mmY2
14u7Capacitor_SMD:C_0402_1005MetricC27
168kResistor_SMD:R_0402_1005MetricR2
1BMI323Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mmU9
1BatteryConnector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ2
1LS013B7DH03Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_HorizontalJ3
1MAX30102OptoDevice:Maxim_OLGA-14_3.3x5.6mm_P0.8mmU10
1MBR0530Diode_SMD:D_SOD-123D1
1MCP73832-2-OTPackage_TO_SOT_SMD:SOT-23-5U3
1MLX90632SLD-DCB-100-RELibrary:SFN3X3_LD_MELU7
1NMOSPackage_TO_SOT_SMD:SOT-323_SC-70Q2
1PMOSPackage_TO_SOT_SMD:SOT-323_SC-70Q1
1SR1HARULibrary:UDFN-6_1P5X1P05_STMU1
1STM32U5A5RJTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU4
1TLV751180330Library:SON_1PDSQR_TEXU6
1TMAG5273C1QDBVRLibrary:DBV0006A-IPC_AU11
1TPD6E05U06RVZPackage_SON:Texas_R-PUSON-N14U2
1TXB0304RUTPackage_DFN_QFN:Texas_R-PUQFN-N12U5
1USB_C_Receptacle_USB2.0_14PLibrary:XUNPU TYPEC-301-ACP16X7J1
1Vibration_motorConnector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalM1

The 78 most common of 81 parts.

Similar boards

  • 4 layers162.6 × 61.5 mmVersaSens HeEx, the printed circuit board in 3D

    VersaSens HeEx

    esl-epfl/VersaSens

    VersaSens: An Extendable Multimodal Platform for Next-Generation Edge-AI Wearables

    335 parts9
  • 2 layers60 × 100 mmBitMasher, the printed circuit board in 3D

    BitMasher

    superkittens/BitMasher-Hardware

    BitMasher hardware design files

    172 parts3
  • 2 layers69.4 × 63.8 mmSmart watch, the printed circuit board in 3D

    Smart watch

    wpmyj/KICAD_SmartwatchPCB

    PCB's

    52 parts
  • 5 layers62 × 52 mmTideband, the printed circuit board in 3D

    Tideband

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    24 parts
  • 4 layers144.3 × 143.8 mmCheep boards, the printed circuit board in 3D

    Cheep boards

    esl-epfl/HEEPidermis

    278 parts12
  • 2 layers45 × 70 mmSenseCam rev1, the printed circuit board in 3D

    SenseCam rev1

    Appiko/sense_snap_hw

    This repository contains all the KiCad based PCB design and related documentation for all the PCBs developed at Appiko.

    80 parts2
  • 4 layers72.7 × 50.2 mmAdc32xx syzygy, the printed circuit board in 3D

    Adc32xx syzygy

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    107 parts205
  • 2 layers40 × 40 mmBc26 module board, the printed circuit board in 3D

    Bc26 module board

    LanternD/NB-Scope

    Hardware and software design for NB-Scope.

    16 parts6Apache-2.0

Questions

How big is the Orologio PCB?

It measures 36.5 × 33 mm and has 6 copper layers, 1.6 mm thick.

What parts does the Orologio use?

81 parts, built around the MAX30102, MLX90632SLD-DCB-100-RE, BMI323 and SR1HARU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Orologio KiCad files?

From the dayve22/fitness-tracker repository on GitHub, at the commit this page was made from: the board is hardware/Orologio.kicad_pcb and its schematic hardware/Orologio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Orologio design in my own project?

Its repository states no licence, so its author keeps all rights: ask dayve22 before reusing the design.