
MM36-Data Expansion
KazanNinja/MM36-Data-Hub
ESP32 based DAQ board. Fit with a 4 external 16bit 5V capable ADCs, 6-DOF IMU, and GPS breakout. Has two 5V > 3.3V & 12V > 3.3V voltage dividers

Unicycle is an open-source printed circuit board by Daxz0, from the Daxz0/unicycle repository on GitHub. It is a 2-layer board of 88 × 58.5 mm with 32 parts on 80 nets, routed with 207 tracks and 4 vias.
It is built around the ESP32-S3-MINI-1-N8, AMS1117-3.3 and MPU-6050. Its parts include 10 capacitors, 7 resistors, 5 diodes, 4 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C10 |
| 2 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 4.7kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7 |
| 2 | 5.1KΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | D_Schottky | Diode_THT:D_DO-15_P15.24mm_Horizontal | D1, D4 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 2.2nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 22uF | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 330uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 330uH | Inductor_THT:L_Toroid_Vertical_L21.6mm_W11.4mm_P7.62mm_Pulse_KM-3 | L1 |
| 1 | 330Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x02_Socket | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J1 |
| 1 | D | Diode_SMD:D_SOD-123F | D2 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D5 |
| 1 | ESP32-S3-MINI-1 | PCM_Espressif:ESP32-S3-MINI-1 | U1 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LM2575-5.0BU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J3 |

KazanNinja/MM36-Data-Hub
ESP32 based DAQ board. Fit with a 4 external 16bit 5V capable ADCs, 6-DOF IMU, and GPS breakout. Has two 5V > 3.3V & 12V > 3.3V voltage dividers

Quadcoach/Jatayu
JATAYU Flight Controller is an in-house, low-cost brushed drone flight controller being developed by The QU4D COACH.
kiranj26/Posture-Tracker-Using-ESP32
Posture Correction using ESP32-MINI-1 and MU sensor (GY-521 / MPU-6050)

caggieb/ESP32-controller-WIP
Design of an ESP32 based controller with IMU, from PCB to software


shreyD2408/Custom_Esp32_Devboard
This project is a custom ESP32-S3 development board designed for robotics and embedded systems. It integrates two DRV8833 motor drivers, an MPU6050 accelerometer and gyroscope, a MAX98357A audio amplifier, and…

stoneoxmike/SelfBalancingRobot
Self Balancing Robot To this point, we have stolen EVERYTHING

It measures 88 × 58.5 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ESP32-S3-MINI-1-N8, AMS1117-3.3 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Daxz0/unicycle repository on GitHub, at the commit this page was made from: the board is pcb/unicycle.kicad_pcb and its schematic pcb/unicycle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Daxz0 before reusing the design.