2 layers100 × 50 mm
2 layers63.5 × 55.9 mm
Servo module
DaWelter/RCCar5Code and materials for my RC model car project
- Size
- 63.5 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 26
- Pads
- 125
- Tracks, vias
- 202, 29
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Oct 2018
- Updated
- 25 Oct 2018
Overview
Servo module is an open-source printed circuit board by DaWelter, from the DaWelter/RCCar repository on GitHub. It is a 2-layer board of 63.5 × 55.9 mm with 32 parts on 26 nets, routed with 202 tracks and 29 vias.
Its parts include 9 diodes, 8 resistors, 5 capacitors, 5 connectors and 3 ICs. It belongs with the robots and motor control boards of this library.
README
kicad/servo-module/readme.mdRaspberry Pi shield project files
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 3.3 | Diodes_THT:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D2, D4, D6 |
| 3 | 330 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 3 | 47u | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C3, C4, C5 |
| 3 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J1, J2, J3 |
| 2 | 1k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 2 | C | Capacitors_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | D_Schottky | Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D9, D12 |
| 2 | D_Zener | Diodes_THT:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D10, D11 |
| 2 | LED | LEDs:LED_D3.0mm | D7, D8 |
| 2 | R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 2 | Regulator | mw_kicad:ChinaReglerV2 | U1, U2 |
| 1 | 100 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | AltiMu-10v4 | mw_kicad:Pololu-AltiMu-10-v4 | U3 |
| 1 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J5 |
| 1 | RPI | mw_kicad:RPI3_Header | J4 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | mw_kicad:Switch | SW2 |
More from DaWelter/RCCar
1Similar boards
- 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0 - 2 layers136.8 × 54.2 mm
Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers
- 2 layers16 × 20 mm
ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm
Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269 - 2 layers40 × 38 mm
Shield
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
32 parts192MIT - 2 layers47 × 39 mm
Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT - 2 layers30.9 × 63 mm
Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
32 parts170CC0-1.0
Questions
How big is the Servo module PCB?
It measures 63.5 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Servo module use?
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Servo module KiCad files?
From the DaWelter/RCCar repository on GitHub, at the commit this page was made from: the board is kicad/servo-module/servo-module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Servo module design in my own project?
Its repository states no licence, so its author keeps all rights: ask DaWelter before reusing the design.