2 layers43.5 × 23 mm
2 layers55 × 65 mm
Zigbee controller
DavoudTaghawiNejad/zigbee_led_controller- Size
- 55 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 81
- Pads
- 383
- Tracks, vias
- 428, 103
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 May 2026
- Updated
- 16 Jul 2026
Overview
Zigbee controller is an open-source printed circuit board by DavoudTaghawiNejad, from the DavoudTaghawiNejad/zigbee_led_controller repository on GitHub. It is a 2-layer board of 55 × 65 mm with 94 parts on 81 nets, routed with 428 tracks and 103 vias.
It is built around the TC4427EOA, CH224K and TPS54560DDA, with the ESP32-C6-MINI-1, RT9080-TD and PSMN1R8-40YLC among its other parts. Its parts include 24 capacitors, 22 resistors, 9 connectors, 6 ICs and 5 diodes. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.
Main components
9
TC4427EOA
SOIC-8-40℃~+85℃ 1.5A 1.5A 19ns 19ns 2 2.4V 4.5V~18V 400uA 800mV MOSFET SOIC-8 Gate Drivers ROHSMicrochip TechnologyGate Drivers
CH224K
ESSOP-10-150mil-1mm-40℃~+90℃ 100W 4V~30V 5V、9V、12V、15V、20V Overvoltage Protection、Thermal Protection PD 3.0 Power Receiver Controller ESSOP-10-150mil-1mm USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
TPS54560DDA
SO-8-EP-40℃~+150℃@(TJ) 1 146uA 2.5MHz 4.5V~60V 5A 800mV~58.8V Adjustable Buck Buck Built-in No SO-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
ESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorised
RT9080-TD
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTDSEMICUncategorised
PSMN1R8-40YLC
LFPAK56(PowerSO-8)-55℃~+175℃ 1 N-channel 1.45V 1.8mΩ@4.5V 100A 272W 310pF 40V 45nC@4.5V 6.68nF LFPAK56(PowerSO-8) MOSFETs ROHSNexperiaMOSFETs
LESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorised
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
B560C
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 500uA@60V 5A 60V 700mV@5A SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky Barrier Diodes (SBD)
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0805_2012Metric | R9, R10, R12, R13, R15, R17, R19, R20, R22, R23 |
| 4 | 1uF | Capacitor_SMD:C_1206_3216Metric | C8, C11, C12, C22 |
| 4 | 1μF | Capacitor_SMD:C_1206_3216Metric | C1, C4, C10, C19 |
| 4 | 33 | Resistor_SMD:R_1206_3216Metric | R11, R14, R16, R18 |
| 4 | C | Capacitor_SMD:C_1206_3216Metric | C20, C21, C23, C24 |
| 4 | PSMN1R8-40YLC | Package_TO_SOT_SMD:LFPAK56 | Q1, Q2, Q3, Q4 |
| 4 | R | Resistor_SMD:R_1206_3216Metric | R1, R2, R5, R7 |
| 4 | TerminalBlock_KF301-5.0 | TerminalBlock:TerminalBlock_KF301-5.0 | J10, J11, J12, J13 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric | C5, C14, C15 |
| 3 | 2.2uF | Capacitor_SMD:C_1206_3216Metric | C2, C3, C16 |
| 3 | 47μF | Capacitor_SMD:C_1206_3216Metric | C9, C13, C17 |
| 3 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3 |
| 2 | 68k | Resistor_SMD:R_1206_3216Metric | R3, R8 |
| 2 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D2, D3 |
| 2 | SS14 | Diode_SMD:D_SMA | D9, D10 |
| 2 | TC4427 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5 |
| 2 | USB power 5A | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP7, JP8 |
| 1 | 10μH | Inductor_SMD:L_Sunlord_MWSA0503S | L1 |
| 1 | 13k | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 180pF | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 330μF 50v | Capacitor_SMD:CP_Elec_10x14.3 | C18 |
| 1 | 5.6nF | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 6k2 | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | B560C | Diode_SMD:D_SMC | D1 |
| 1 | Boot | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW4 |
| 1 | CFG1-H | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | CFG1-L | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | CFG2-H | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | CFG2-L | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | CFG3-H | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | CFG3-L | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | CH224K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm_ThermalVias | U9 |
| 1 | Conn_01x05 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J4 |
| 1 | Conn_01x06 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J2 |
| 1 | Conn_01x07 | Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J3 |
| 1 | EN | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U2 |
| 1 | Fuse 3A | Fuse:Fuse_1206_3216Metric | F2 |
| 1 | Fuse 5A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | GND | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | IO20 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP13 |
| 1 | IO21 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP12 |
| 1 | IO22 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP10 |
| 1 | IO23 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP9 |
| 1 | KF635 | TerminalBlock:TerminalBlock_KF635-6.35 | J1 |
| 1 | RT9080 | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U6 |
| 1 | SPI boot | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | TPS54560 | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm__bigger_ThermalVias | U1 |
| 1 | USB power 3A | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP11 |
| 1 | USB_C_Receptacle_GCT_USB4105 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
Questions
How big is the Zigbee controller PCB?
It measures 55 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zigbee controller use?
94 parts, built around the TC4427EOA, CH224K, TPS54560DDA and ESP32-C6-MINI-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zigbee controller KiCad files?
From the DavoudTaghawiNejad/zigbee_led_controller repository on GitHub, at the commit this page was made from: the board is zigbee_controller.kicad_pcb and its schematic zigbee_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zigbee controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask DavoudTaghawiNejad before reusing the design.
Similar boards
- 4 layers126 × 57 mm
- 2 layers120 × 72.4 mm
Irrigation ctrl main board
mwick83/irrigation_ctrl_hw
Irrigation Controller aiming to keep (my) plants happy - hardware repository
85 parts1BSD-3-Clause - 4 layers
Ceilingpuck v3 final v0-2
nate922/ceilingpuck_v4
Ceiling Puck v4 - smart ceiling sensor/actuator
115 parts - 4 layers48.3 × 20.3 mm
- 4 layers66.7 × 39 mm
- 2 layers100 × 100 mm
Power supply
gabrielfbdiniz/PFC-Boost-STM32
Conversor estático de potência CA/CC com Correção Ativa do Fator de Potência (Active PFC) na topologia Boost, projetado para elevar a tensão da rede elétrica retificada (127V / 220V AC) para um barramento CC…
89 parts - 2 layers100 × 72.5 mm
