2 layers229.5 × 95.1 mm
Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
55 parts2.1k
2 layers55.2 × 117.8 mm
Koracni ksilofon
davidzindovic/Educational-staircaseA project for an educational stairway enhancment, which consists of sensor for tracking the steps on stairs. Walking on stairs triggers audio and video effects.
- Size
- 55.2 × 117.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 110
- Pads
- 262
- Tracks, vias
- 1,457, 178
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Jun 2025
- Updated
- 22 May 2026
Overview
Koracni ksilofon is an open-source printed circuit board by davidzindovic, from the davidzindovic/Educational-staircase repository on GitHub. It is a 2-layer board of 55.2 × 117.8 mm with 55 parts on 110 nets, routed with 1,457 tracks and 178 vias.
Its parts include 24 connectors, 7 ICs, 5 resistors, 4 capacitors and 3 switches. It belongs with the ESP32 boards of this library.
README
README.mdMusical stairs with video effects
This project was constructed for use on the Faculty of Education, University of Ljubljana. The goal was to create attachable hardware to put onto an existing staircase (covering half the surface) with 2 turns and 25 steps. Input data is processed by an ESP32, musical effects are played from an SD card with the help od MP3-TF player and visual effects are displayed on a projection/ screen via Raspberry Pi. Data is transmitted from the ESP32 to RPI via Bluetooth.
Hardware
- ESP32
- MP3-TF player module
- Mux 4051
- Raspberry Pi 5
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14 |
| 7 | 4051 | Package_DIP:DIP-16_W7.62mm | U1, U2, U3, U4, U5, U6, U7 |
| 4 | ESP32 M3 | Moji_footprinti:M3 luknja | H1, H2, H3, H4 |
| 4 | Mount | MountingHole:MountingHole_3.2mm_M3 | H5, H6, H7, H8 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 0.1uF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R5, R6 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J15, J16 |
| 2 | Conn_01x18_Socket | Connector_PinSocket_2.54mm:PinSocket_1x18_P2.54mm_Vertical | J19, J20 |
| 1 | 3V3 jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | 5V jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | AudioJack2_Ground_Switch | Custom LED:Audio jack connector | J23 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | Flash Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J18 |
| 1 | Power input | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J26 |
| 1 | SW_DIP_x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | Serial Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | Volume down | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | Volume up | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | backup | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | backup za analog | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Questions
How big is the Koracni ksilofon PCB?
It measures 55.2 × 117.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Koracni ksilofon use?
55 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Koracni ksilofon KiCad files?
From the davidzindovic/Educational-staircase repository on GitHub, at the commit this page was made from: the board is Hardware/Koracni ksilofon.kicad_pcb and its schematic Hardware/Koracni ksilofon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Koracni ksilofon design in my own project?
Its repository states no licence, so its author keeps all rights: ask davidzindovic before reusing the design.
Similar boards
- 2 layers370 × 11 mm
Daylight Disco XXL
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
55 parts1.1kGPL-3.0 - 2 layers370 × 10 mm
E3NGLEDstick
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
55 parts915 - 2 layers139.3 × 94.8 mm
Flake
lever-tech/flake
An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]
55 parts531CERN-OHL-W-2.0 - 2 layers237.5 × 102.9 mm
Memory
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
55 parts301Unlicense - 2 layers60.6 × 24.1 mm
Blep hackerboard
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
55 parts253GPL-3.0 - 2 layers100 × 96.5 mm
Keyboard ch552-36-lhs
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
55 parts236 - 2 layers190.5 × 85.7 mm
Dissatisfaction30
dcpedit/dissatisfaction30
To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).
55 parts147CC-BY-4.0