
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Saturnine is an open-source printed circuit board by davidphilipbarr, from the davidphilipbarr/saturnine repository on GitHub, published under the MIT licence. It is a 2-layer board of 99 × 80 mm with 25 parts on 24 nets, routed with 368 tracks and 0 vias.
Its parts include 18 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | SW_Push | Kailh:SW_PG1350_rev_DPB | SW2, SW3, SW4, SW5, SW6, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW20, SW21, SW22 +2 |
| 2 | MountingHole_Pad | kbd:1pin_conn | Bat+1, BatGND1 |
| 2 | ProMicro-kbd | kbd:ProMicro_v3.5 | U1, U1 |
| 1 | LOGO | kbd:bear | G*** |
| 1 | SW_Push | kbd:SW_SPST_B3U-1000P | RSW1 |
| 1 | SW_SPDT | Kailh:SPDT_C128955 | SW_POWER1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 99 × 80 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the davidphilipbarr/saturnine repository on GitHub, at the commit this page was made from: the board is saturnine.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).