
Chococorne
davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.

This is the main Choc v1 board we all know and love.
Hypergolic left side is an open-source printed circuit board by davidphilipbarr, from the davidphilipbarr/testing-boards repository on GitHub. It is a 2-layer board of 118.8 × 92.6 mm with 23 parts on 24 nets, routed with 464 tracks and 16 vias.
Its parts include 17 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

This is the main Choc v1 board we all know and love.
To order the PCB the following settings are recommended1,2:
| Detail | Value |
|---|---|
| Gerber file | sweepv2.X_gerber.zip |
| Base material | FR-4 |
| Layers | 2 |
| Dimension | 216.9mm x 86.9mm |
| Different design | 2 |
| Delivery format | Panel by customer |
| PCB thickness | 1.6mm |
| PCB color | (Personal preference) |
| Silkscreen | (Personal preference) |
| Surface finish | (Personal preference) |
| Outer copper weight | 1oz |
| Gold Fingers | No |
| Confirm production file | No |
| Castellated holes | No |
| Remove order number | Yes |
1: Settings are for JLCPCB, but could work for other manufacturers.
2: Settings are taken from Kyek's video guide.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | SW_Push | Kailh:SW_PG1350_rev_DPB2.1 | SW2, SW3, SW4, SW5, SW6, SW9, SW10, SW11, SW12, SW15, SW16, SW17, SW18, SW20, SW21 |
| 2 | SW_Push | Kailh:SW_PG1350_rev_DPB | SW8, SW14 |
| 1 | MountingHole_Pad | kbd:1pin_conn | gnd |
| 1 | ProMicro-kbd | kbd:ProMicroSimpleJumperDPBnn2.5 | U1 |
| 1 | SW_Push | kbd:ResetSW | RSW1 |
| 1 | SW_SPDT | Kailh:SPDT_C128955r | SW_POWER1 |
| 1 | TRRS | Kailh:TRRS-PJ-DPB2 | Jack0 |
| 1 | Val** | kbd:1pin_conn | + |

davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.

davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.


davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.

davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.

davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.

davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.

davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.

davidphilipbarr/testing-boards
This is the main Choc v1 board we all know and love.



google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards






Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
It measures 118.8 × 92.6 mm and has 2 copper layers, 1.6 mm thick.
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the davidphilipbarr/testing-boards repository on GitHub, at the commit this page was made from: the board is hypergolic V1.7/hypergolic_left-side.kicad_pcb and its schematic Sweep mid/sweep-mid.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask davidphilipbarr before reusing the design.