Skip to the content
2 layers125.5 × 95.5 mmHypergolic high, the printed circuit board in 3D

Ergonomic 34 key keyboard with ring and pinky splay.

Size
125.5 × 95.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
22
Pads
414
Tracks, vias
265, 0
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
5 Apr 2021
Updated
8 May 2023

Overview

Hypergolic high is an open-source printed circuit board by davidphilipbarr, from the davidphilipbarr/hypergolic repository on GitHub. It is a 2-layer board of 125.5 × 95.5 mm with 21 parts on 22 nets, routed with 265 tracks and 0 vias.

Its parts include 17 switches and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

hypergolic

Ergo 34 keyboard(s) that uses no diodes.

HERE BE DRAGONS

Some files maybe named wrong, eg left and right may be incorrect, you will need to check which way around they are by tracing the RAW line or some other method you cooked up yourself.

Parts

21
QtyValueFootprintReferences
17SW_PushKailh:keyswitch_cherrymx_alps_choc12_1u_flipSW2, SW3, SW4, SW5, SW6, SW8, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW20, SW21 +1
1ProMicro-kbdkbd:ProMicro_v3_min-tbU1
1SW_Pushkbd:ResetSWRSW1
1TRRSKailh:TRRS-PJ-DPB2Jack0

The 20 most common of 21 parts.

More from davidphilipbarr/hypergolic

6
  • 2 layers238.2 × 206.5 mmHypergarlic, the printed circuit board in 3D

    Hypergarlic

    davidphilipbarr/hypergolic

    Ergonomic 34 key keyboard with ring and pinky splay.

    45 parts50
  • 2 layers118.5 × 206.5 mmHypergolic flip, the printed circuit board in 3D

    Hypergolic flip

    davidphilipbarr/hypergolic

    Ergonomic 34 key keyboard with ring and pinky splay.

    28 parts50
  • 2 layers119.4 × 90.6 mmHypergolic right side, the printed circuit board in 3D

    Hypergolic right side

    davidphilipbarr/hypergolic

    Ergonomic 34 key keyboard with ring and pinky splay.

    26 parts50
  • 2 layers118.6 × 206.5 mmHypergolic left, the printed circuit board in 3D

    Hypergolic left

    davidphilipbarr/hypergolic

    Ergonomic 34 key keyboard with ring and pinky splay.

    25 parts50
  • 2 layers118.8 × 92.6 mmHypergolic left side, the printed circuit board in 3D

    Hypergolic left side

    davidphilipbarr/hypergolic

    Ergonomic 34 key keyboard with ring and pinky splay.

    24 parts50
  • 2 layers118 × 206.5 mmClove, the printed circuit board in 3D

    Clove

    davidphilipbarr/hypergolic

    Ergonomic 34 key keyboard with ring and pinky splay.

    22 parts50

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Hypergolic high PCB?

It measures 125.5 × 95.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hypergolic high use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hypergolic high KiCad files?

From the davidphilipbarr/hypergolic repository on GitHub, at the commit this page was made from: the board is hypergolic V1.4 high/hypergolic_high.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hypergolic high design in my own project?

Its repository states no licence, so its author keeps all rights: ask davidphilipbarr before reusing the design.