
Vmc
davidmpye/snackbot
Code, PCB design and 3d printed bits to convert our vending machine to a Pi-based solution

Code, PCB design and 3d printed bits to convert our vending machine to a Pi-based solution
MembraneKeyboard is an open-source printed circuit board by davidmpye, from the davidmpye/snackbot repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60 × 50 mm with 16 parts on 37 nets, routed with 119 tracks and 9 vias.
It is built around the BSS138. Its parts include 5 resistors, 3 connectors, 2 transistors and 1 IC. It belongs with the RP2040 boards of this library.
Snackbot is Makerspace's vending machine
It was a Polyvend vending machine, but is now a bit of a hybrid of Raspberry Pi and Pico microcontrollers.
More information (and pictures!) to follow!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistor_SMD:R_1206_3216Metric | R1, R4, R5, R6, R7 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x11 | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J2 |
| 1 | Pico | Pi:RPi_Pico_SMD_TH | U1 |
| 1 | ServiceSwitch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
The 11 most common of 16 parts.

davidmpye/snackbot
Code, PCB design and 3d printed bits to convert our vending machine to a Pi-based solution

StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

No0ne/ps2x2pico
USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the davidmpye/snackbot repository on GitHub, at the commit this page was made from: the board is matrix-keyboard/pcb/MembraneKeyboard.kicad_pcb and its schematic matrix-keyboard/pcb/MembraneKeyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).