Skip to the content
2 layers166.4 × 83.8 mmBlockRelay, the printed circuit board in 3D

Serial Model Railroad Control

Size
166.4 × 83.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
83
Nets
69
Pads
263
Tracks, vias
635, 42
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
23 Mar 2025
Updated
2 Oct 2026

Overview

BlockRelay is an open-source printed circuit board by DavidMFlynn, from the DavidMFlynn/SerialMRRC repository on GitHub, published under the MIT licence. It is a 2-layer board of 166.4 × 83.8 mm with 83 parts on 69 nets, routed with 635 tracks and 42 vias.

It is built around the 74HC259D. Its parts include 25 diodes, 21 resistors, 12 capacitors, 6 transistors and 6 switches. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

SerialMRRC

Serial Model Railroad Control

This is a set of PCBs and software to control a model railroad with RS485 data buss.

Stand Alone Boards

Controller Board, PIC15F15345, 1KB Ram, 224B Flash, 8KW Program memory Switch Machine, 1 servo, 1 DPDT relay Switch Machine and Signals, 1 servo, 1 DPDT relay, 5 Signal heads

Daughter Cards

USB Daughter Board Input 32 Daughter Bouad, 32 Pull-to-Ground inputs Output 32 Daughter Board, 32 Open collector Pull-to-Ground outputs Lighting 8x Transistot Outputs, +12v resistor current limited outputs

Anamation Controller, 8 servos Block Detector, detects voltage across diode/resistor Optical Detector, broken beam or reflected beam

USB Operation

When a command packet is received from RX2 (USB): Source=Master, Destination=Me: Parse and Process the command. Send any requested data back to Master on TX2 (USB). Source=Master, Destination<>Me: Retransmit on TX1 (RS485)

When a command packet is received from RX1 (RS485): Source=any, Destination=Me: Parse and Process the command. Send any requested data back to the sender on TX1 (RS485). Source=any, Destination=Master: Retransmit on TX2 (USB) Source=any, Destination= other than Master or Me do nothing.

Node (w/o USB)

When a command packet is received from RX1 (RS485): Source=any, Destination=Me: Parse and Process the command. Send any requested data back to the sender on TX1 (RS485). Source=any, Destination<>Me do nothing.

Parts

83
QtyValueFootprintReferences
131A 1000VDiode_SMD:D_SMA_HandsolderingD1, D8, D9, D11, D13, D14, D15, D17, D19, D20, D21, D23, D25
100.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C3, C4, C5, C9, C10, C11, C12, C13, C14
8MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6, H7, H8
8Yellow LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD6, D7, D10, D12, D16, D18, D22, D24
74K7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R10, R11, R14, R15, R18, R19
62N7000Package_TO_SOT_THT:TO-92_InlineQ1, Q2, Q3, Q4, Q5, Q6
647RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8, R9, R12, R13, R16, R17
6Relay_DPDTRelay_THT:Relay_DPDT_Finder_40.52K1, K2, K3, K4, K5, K6
4Schottky_AKA DPAKPackage_TO_SOT_SMD:TO-252-2D2, D3, D4, D5
21K0Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
227KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R5
22K2Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R7
22K2Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_HorizontalR20, R21
23.3uFCapacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mmC1, C8
174HC259Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU2
1Conn_02x05_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_VerticalJ3
1Conn_02x06_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ2
1L78L05_SOT89Package_TO_SOT_SMD:SOT-89-3U1
1Screw_Terminal_01x12TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-12-3.5-H_1x12_P3.50mm_HorizontalJ1

More from DavidMFlynn/SerialMRRC

11
  • 2 layers66 × 117 mmInput32DC, the printed circuit board in 3D

    Input32DC

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    224 parts1MIT
  • 2 layers66 × 117 mmOutput32DC, the printed circuit board in 3D

    Output32DC

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    98 parts1MIT
  • 2 layers98 × 68 mmSMRRC SwitchAndSignal, the printed circuit board in 3D

    SMRRC SwitchAndSignal

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    70 parts1MIT
  • 2 layers82.6 × 25.4 mmDCC Detector, the printed circuit board in 3D

    DCC Detector

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    57 parts1MIT
  • 2 layers95.4 × 54.4 mmSMRRC Switch, the printed circuit board in 3D

    SMRRC Switch

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    57 parts1MIT
  • 2 layers55 × 60 mmLights, the printed circuit board in 3D

    Lights

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    37 parts1MIT
  • 2 layers60 × 60 mmSMRRC Servo8, the printed circuit board in 3D

    SMRRC Servo8

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    34 parts1MIT
  • 2 layers60 × 60 mmSMRRC, the printed circuit board in 3D

    SMRRC

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    32 parts1MIT
  • 2 layers36 × 40 mmSignalHead3, the printed circuit board in 3D

    SignalHead3

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    24 parts1MIT
  • 2 layers60 × 60 mmSMRRC USB, the printed circuit board in 3D

    SMRRC USB

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    19 parts1MIT
  • 2 layers60 × 60 mmSMRRC PacketSerial, the printed circuit board in 3D

    SMRRC PacketSerial

    DavidMFlynn/SerialMRRC

    Serial Model Railroad Control

    13 parts1MIT

Similar boards

  • 4 layers184.2 × 169.5 mmSB mini II, the printed circuit board in 3D

    SB mini II

    simonboak/SB-mini-II

    A homebrewed Apple II clone

    97 parts76MIT
  • 2 layers194.9 × 90.2 mmGeneric front panel, the printed circuit board in 3D

    Generic front panel

    rweather/generic-front-panel

    Generic Front Panel for Hombrew Computers

    74 parts2MIT
  • 2 layers83.8 × 60.8 mmGenesis stacking 3d glasses cart, the printed circuit board in 3D

    Genesis stacking 3d glasses cart

    abzman/SMS-3D-glasses-genesis-cart-stack

    pass-through adapter to add 3d glasses support to a genesis running master system software

    31 parts1Unlicense
  • 2 layers212 × 126 mmUno-14500, the printed circuit board in 3D

    Uno-14500

    juniperlynx/Uno-14500

    A trainer / demonstration system for the Motorola MC14500B

    84 parts1
  • 6 layers150 × 60 mmLogic macropad, the printed circuit board in 3D

    Logic macropad

    Greentalinjo/74HController

    A game controller built entirely from discrete 74HC logic - no microcontroller, a diode ROM and an 8-N-1 serial frame out of an RJ45 console port.

    170 parts
  • 2 layers233.4 × 280 mmCft board1, the printed circuit board in 3D

    Cft board1

    alexiosc/cft

    The CFT homebrew minicomputer

    269 parts6GPL-3.0
  • 2 layers50 × 100 mmLamp card, the printed circuit board in 3D

    Lamp card

    retrac0/retelex

    Retro telephone exchange. Also retro telex exchange.

    23 parts
  • 2 layers74.5 × 56.3 mmPowerBook, the printed circuit board in 3D

    PowerBook

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    83 parts459GPL-3.0

Questions

How big is the BlockRelay PCB?

It measures 166.4 × 83.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BlockRelay use?

83 parts, built around the 74HC259D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BlockRelay KiCad files?

From the DavidMFlynn/SerialMRRC repository on GitHub, at the commit this page was made from: the board is Block Relay PCB/BlockRelay.kicad_pcb and its schematic Block Relay PCB/BlockRelay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BlockRelay design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).