2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0
2 layers47.8 × 79.5 mm
NDS CardReader
Davidc96/NDS-CardReader1Custom PCB which converts NDS pins to Universal Pins
- Size
- 47.8 × 79.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 17
- Pads
- 34
- Tracks, vias
- 53, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Nov 2024
- Updated
- 29 Nov 2024
Overview
NDS CardReader is an open-source printed circuit board by Davidc96, from the Davidc96/NDS-CardReader repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 47.8 × 79.5 mm with 2 parts on 17 nets, routed with 53 tracks and 4 vias.
Its parts include 1 IC and 1 connector.
README
README.mdNDS-CardReader
Custom PCB which converts NDS pins to Universal Pins
About this project
This project was used to analyze the traffic between a NDS cartidge and the NDS. However, this PCB does nothing, instead it converts the NDS pins to Universal Pins in order to connect it with a Protoboard or whatever you want to connect it.
Usage
This PCB is made using KiCad, just make the gerber files and upload it on JLCPCB
Results
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x17_Female | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J1 |
| 1 | ndsPADS-Connector | NDS Pinout:nds_contact_slot-1 | U1 |
Questions
How big is the NDS CardReader PCB?
It measures 47.8 × 79.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NDS CardReader use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NDS CardReader KiCad files?
From the Davidc96/NDS-CardReader repository on GitHub, at the commit this page was made from: the board is NDS Card Reader.kicad_pcb and its schematic NDS Card Reader.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NDS CardReader design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
