
SmartwatchPCB
davedarko/SmartWatchPCB
work in progress, this is just setup to jump between computers n stuff.

work in progress, this is just setup to jump between computers n stuff.
SmartwatchPCB is an open-source printed circuit board by davedarko, from the davedarko/SmartWatchPCB repository on GitHub. It is a 2-layer board of 28.4 × 40 mm with 53 parts on 52 nets, routed with 451 tracks and 80 vias.
It is built around the TFBS4711-TT1. Its parts include 9 resistors, 7 capacitors, 5 ICs, 3 connectors and 2 diodes. It belongs with the SAM D and SAM boards of this library.
work in progress, this is just setup to jump between computers n stuff.
I'm replacing the PCB of a cool watch from aliexpress
more on the project here https://hackaday.io/project/180832-new-pcb-for-calculator-watch
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | SW_Push | SmartwatchPCB:button | SW_0, SW_1, SW_2, SW_3, SW_4, SW_5, SW_6, SW_7, SW_8, SW_9, SW_ADD1, SW_DIV1, SW_DOT1, SW_EQ1, SW_M1, SW_MUL1 +4 |
| 9 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP_GND1, TP_PIEZO_GND1, TP_PIEZO_SIGNAL1, TP_RST1, TP_VBAT1, TP_VLCD1 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C5, C6, C7 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Castellated | D1, D2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | AP2112K-2.5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Male | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | L | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | LCD | SmartwatchPCB:display_MOUNT | U1 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SAML22G | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | IC1 |
| 1 | TFBS4711 | SmartwatchPCB:TFBS4711 | IC2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521_CircularHoles | J1 |

davedarko/SmartWatchPCB
work in progress, this is just setup to jump between computers n stuff.

davedarko/SmartWatchPCB
work in progress, this is just setup to jump between computers n stuff.






davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 28.4 × 40 mm and has 2 copper layers, 0.6 mm thick.
53 parts, built around the TFBS4711-TT1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the davedarko/SmartWatchPCB repository on GitHub, at the commit this page was made from: the board is KiCad/SmartwatchPCB.kicad_pcb and its schematic KiCad Rev 1/SmartwatchPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask davedarko before reusing the design.