

Ender rpi
Files for a custom box that holds an RPi and a display mounted on an Ender 3
- Size
- 92 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 44
- Pads
- 112
- Tracks, vias
- 137, 6
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jan 2026
- Updated
- 30 Jan 2026
Overview
Ender rpi is an open-source printed circuit board by davavi02, from the davavi02/custom-enderpi-holder repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 92 × 85 mm with 9 parts on 44 nets, routed with 137 tracks and 6 vias.
It is built around the MCS04020C5101FE000, 10164359-00011LF and DS01-254-S-02BE, with the M20-9750246 and TSW-120-08-T-D-RA among its other parts. Its parts include 5 connectors, 2 resistors, 1 switch and 1 fuse.
Main components
5MCS04020C5101FE000
0402-55℃~+155℃ 100mW 5.1kΩ 50V Thin Film Resistor ±1% ±50ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount10164359-00011LF
SMD-25℃~+85℃ 1 10,000 Cycles 20V 3A 6P Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSAmphenolUSB ConnectorsDS01-254-S-02BE
插件,P=2.54mm-40℃~+85℃ 2 2,000 cycles 2.54mm 24V 25mA PC Pin SPST Slide, Rocked 插件,P=2.54mm DIP Switches ROHSCUIDIP SwitchesM20-9750246
弯插,P=2.54mm-40℃~+105℃ 1 2.54mm 2P 3A Black Brass Right Angle Tin 弯插,P=2.54mm Pin Headers ROHSHarwinPin HeadersTSW-120-08-T-D-RA
弯插,P=2.54mm-55℃~+105℃ 2 2.54mm 2.54mm 40P Black Phosphor bronze Right Angle Tin 弯插,P=2.54mm Pin Headers ROHSSamtecPin Headers
README
README.mdcustom-enderpi-holder
Files for a custom box that holds an RPi and a display mounted on an Ender 3
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MCS04020C5101FE000 | SamacSys_Parts:RESC1005X37N | R1, R2 |
| 1 | 10164359-00011LF | SamacSys_Parts:1016435900011LF | J3 |
| 1 | 1761682-3 | SamacSys_Parts:SHDRRA10W66P254_2X5_2032X902X935P | J2 |
| 1 | DS01-254-S-02BE | SamacSys_Parts:DS01254S02BE | S1 |
| 1 | M20-9750246 | SamacSys_Parts:HDRRA2W66P0X254_1X2_508X254X264P | J5 |
| 1 | PRT-14017 | SamacSys_Parts:RHDR40W64P254_2X20_5130X500X1375P | J1 |
| 1 | TSW-120-08-T-D-RA | SamacSys_Parts:HDRRA40W64P254_2X20_5080X254X610P | J4 |
| 1 | ~ | Babid:PTSLR12106V300 | F1 |
Similar boards
- 4 layers99 × 64 mm

- 4 layers40 × 30 mm

Health Watch
abendezu10/PulseWatch
Developed a fully functional smartwatch using an STM32 microcontroller, featuring real-time heart rate monitoring.
37 parts - 4 layers106 × 61.7 mm

Business card
Lodigolden/business_card
A cool PCB business card based on a concept I saw online that I added scope to.
121 parts1 - 4 layers73.7 × 16.8 mm

- 2 layers97 × 97 mm

Mm main pcba gen1-reva
MakaniMotion/mm-fan-gen1
Modular DIY fan platform based on PC fan hardware, 3D-printed parts and a simple control interface.
38 parts - 2 layers93.2 × 32.9 mm

- 2 layers103 × 30.5 mm

- 2 layers31.8 × 47.6 mm

Questions
How big is the Ender rpi PCB?
It measures 92 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ender rpi use?
9 parts, built around the MCS04020C5101FE000, 10164359-00011LF, DS01-254-S-02BE and M20-9750246. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ender rpi KiCad files?
From the davavi02/custom-enderpi-holder repository on GitHub, at the commit this page was made from: the board is PCB/ender-rpi.kicad_pcb and its schematic PCB/ender-rpi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ender rpi design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).