6 layers245.6 × 153.7 mm
2 layers116 × 52 mm
Controller
datamaskinprosjekt/PCB- Size
- 116 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 29
- Pads
- 82
- Tracks, vias
- 188, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Sep 2020
- Updated
- 26 Nov 2020
Overview
Controller is an open-source printed circuit board by datamaskinprosjekt, from the datamaskinprosjekt/PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 116 × 52 mm with 13 parts on 29 nets, routed with 188 tracks and 9 vias.
It is built around the ATMEGA168-20AU and RJ45. Its parts include 4 connectors, 2 capacitors, 2 ICs, 2 switches and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdUseful links:
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C68, C69 |
| 2 | Conn_01x01_Female | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_B3S-1000 | SW3, SW4 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | ATmega168-20AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U10 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J20 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ2 |
| 1 | JOYSTICKPTH | SparkFun-Electromechanical:JOYSTICK | U11 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J7 |
Questions
How big is the Controller PCB?
It measures 116 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
13 parts, built around the ATMEGA168-20AU and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the datamaskinprosjekt/PCB repository on GitHub, at the commit this page was made from: the board is Controller/Controller/Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from datamaskinprosjekt/PCB
2- 2 layers22.5 × 20.3 mm
Similar boards
- 2 layers100 × 100 mm
Capacitive touch demo
hackerspace-ntnu/arkademaskin
Repository for å organisere arkademaskin-prosjektgruppe
19 parts1MIT - 2 layers80 × 130 mm
E003-capstan
KP1533TM2/e003-capstan
Блок управления ведущим двигателем Олимпа 003 с ФАПЧ, основанный на БУВД самодельного магнитофона TK-140 leoniv
130 parts1 - 4 layers50 × 40 mm
Rpm meter arduino
kikiosvetnik/rpm-meter-with-atmel168
PCB and Software project of RPM meter using atmega168 and custom pcb
54 parts - 2 layers50 × 106 mm
- 2 layers18.5 × 43.2 mm
Arduino Nano (Clone)
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
18 parts2 - 2 layers82 × 66 mm
- 2 layers
- 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470