4 layers76.2 × 76.2 mm
Dodekaedri
e-xla/dodekaedri
dodekaedrin muotoinen radio ":D" / dodecahedron shaped radio ":D"
227 parts2
2 layers161 × 78 mm
- Size
- 161 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 58
- Pads
- 143
- Tracks, vias
- 338, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Nov 2024
- Updated
- 19 Jun 2026
Overview
Defi is an open-source printed circuit board by Darkzveller, from the Darkzveller/ProgrammeGyropodeV2 repository on GitHub. It is a 2-layer board of 161 × 78 mm with 37 parts on 58 nets, routed with 338 tracks and 12 vias.
It is built around the TL082 and IRL510PBF. Its parts include 10 connectors, 7 resistors, 6 capacitors, 5 diodes and 4 ICs. It belongs with the ESP32 boards of this library.
Main components
2Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | FootprintGamelGe2_v6:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1, C3, C5, C6 |
| 4 | Mounting_Screw_3mm | FootprintGamelGe2_v6:Mounting_Screw_3mm | J5, J6, J7, J9 |
| 3 | 1N400X | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D5 |
| 2 | 480 | FootprintGamelGe2_v6:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | Autocom2 | FootprintGamelGe2_v6:Autocom2 | J2, J3 |
| 2 | Autocom4 | FootprintGamelGe2_v6:Autocom4 | J4, J8 |
| 2 | LED3mm_orange | FootprintGamelGe2_v6:LED_D3.0mm_orange | D3, D4 |
| 2 | SW_Push_blue | FootprintGamelGe2_v6:SW_PUSH_5mm_blue | SW1, SW2 |
| 1 | 100 | FootprintGamelGe2_v6:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 100µ | FootprintGamelGe2_v6:CP_Radial_D10.0mm_P5.00mm | C4 |
| 1 | 10k | FootprintGamelGe2_v6:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 15k | FootprintGamelGe2_v6:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 330n | FootprintGamelGe2_v6:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 5600 | FootprintGamelGe2_v6:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | Autocom4 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J10 |
| 1 | ESP32-DEVKITC-32D | mecatro:MODULE_ESP32-DEVKITC-32D | U2 |
| 1 | HF3FA | LibRelais:HF3FA | R5 |
| 1 | IRL510 | FootprintGamelGe2_v6:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | LM7805_TO220 | FootprintGamelGe2_v6:TO-220-3_Horizontal_TabDown | U3 |
| 1 | MPU6050 | mecatro:MPU6050 | MPU1 |
| 1 | Mini_L298N | LibMiniL298N:Mini_L298N | U1 |
| 1 | NetTie_2 | mecatro:NetTie-2_SMD_Pad2.0mm | NT4 |
| 1 | Omnimate2 | FootprintGamelGe2_v6:OmnimateSL-5,08_1x02_P5.08mm_Vertical | J1 |
| 1 | TL082 | FootprintGamelGe2_v6:DIP-8_W7.62mm_LongPads | U4 |
Questions
How big is the Defi PCB?
It measures 161 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Defi use?
37 parts, built around the TL082 and IRL510PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Defi KiCad files?
From the Darkzveller/ProgrammeGyropodeV2 repository on GitHub, at the commit this page was made from: the board is Kicad Defi/Defi.kicad_pcb and its schematic Kicad Defi/Defi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Defi design in my own project?
Its repository states no licence, so its author keeps all rights: ask Darkzveller before reusing the design.
Similar boards
- 2 layers152.4 × 55.9 mm
SainSmartFanModKiCad
jurihock/SainSmartFanMod
SainSmart solder fume extractor modification
20 parts2GPL-3.0 - 2 layers63.5 × 53.3 mm
- 2 layers130 × 92 mm
- 2 layers31.8 × 28.1 mm
- 2 layers95 × 60 mm
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers82.1 × 82.1 mm
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0