2 layers66.9 × 74.5 mm
2 layers100 × 60 mm
Iecprinter
danwerner21/iecprinterIEC Wifi Printer interface for Commodore Computers
- Size
- 100 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 45
- Pads
- 103
- Tracks, vias
- 224, 2
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Jul 2024
- Updated
- 28 Jul 2024
Overview
Iecprinter is an open-source printed circuit board by danwerner21, from the danwerner21/iecprinter repository on GitHub. It is a 2-layer board of 100 × 60 mm with 20 parts on 45 nets, routed with 224 tracks and 2 vias.
Its parts include 6 resistors, 6 connectors, 3 ICs and 1 capacitor. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1KΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 470Ω | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R6 |
| 2 | IEC PORT | CUSTOM:din6 | J1, J2 |
| 1 | .01uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 7406 | Package_DIP:DIP-14_W7.62mm_Socket | U6 |
| 1 | ADDRESS 4/5 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | BUSY LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | ESP32_MODULE | CUSTOM:ESP32_DEVKIT_30 | U5 |
| 1 | HV-LV | WernerCustomLibrary:HV-LV | U1 |
| 1 | ONLINE LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | ONLINE SWITCH | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
Questions
How big is the Iecprinter PCB?
It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Iecprinter use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Iecprinter KiCad files?
From the danwerner21/iecprinter repository on GitHub, at the commit this page was made from: the board is hardware/iecprinter.kicad_pcb and its schematic hardware/iecprinter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Iecprinter design in my own project?
Its repository states no licence, so its author keeps all rights: ask danwerner21 before reusing the design.
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772