
Soily
danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…
SWD USBC InlineAdapter is an open-source printed circuit board by danstiner, from the danstiner/embedded repository on GitHub. It is a 4-layer board of 17.8 × 27.5 mm with 10 parts on 31 nets, routed with 186 tracks and 36 vias.
Its parts include 5 resistors, 4 connectors and 1 diode. It belongs with the interfaces and adapters boards of this library.
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint | +-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | D1 | 1 | RED LED | 150060SS75000 | Diode_SMD:D_0603_1608Metric | | J1 | 1 | Conn_ARM_JTAG_SWD_10 | FTSH-105-01-F-DV-K | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | | J2 | 1 | Conn_01x04 | 0532610471 | Connector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | | J3 | 1 | USB_C_Receptacle | USB4056-03-A | USB4056_03_A:GCT_USB4056-03-A_REVA2 | | P1 | 1 | USB_C_Plug | USB4155-03-C | USB4155_03_C:GCT_USB4155-03-C_REVA | | R1 | 1 | 100Ω | RC0603FR-07100RL | Resistor_SMD:R_0603_1608Metric | | R2 | 1 | 22kΩ ±5% | RC0603FR-1322KL | Resistor_SMD:R_0603_1608Metric | | R3 | 1 | 10kΩ ±5% | RC0603FR-0710KL | Resistor_SMD:R_0603_1608Metric | | R4,R5 | 2 | 5.1k | RC0603FR-075K1L | Resistor_SMD:R_0603_1608Metric | +-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 1 | 100Ω | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10kΩ ±5% | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 22kΩ ±5% | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | RED LED | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | USB_C_Plug | USB4155_03_C:GCT_USB4155-03-C_REVA | P1 |
| 1 | USB_C_Receptacle | USB4056_03_A:GCT_USB4056-03-A_REVA2 | J3 |

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…

danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…


nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.


clydeshaffer/gametank
design files for the gametank hardware implementation

lukasloetkolben/OpenpilotHardware
Welcome to the Openpilot Hardware Collection!

COVESA/Open1722
Open-source implementation of the IEEE 1722 protocol, for streaming audio/video, tunneling CAN/LIN messages and enabling remote access to peripherals

system76/thelio-io-hardware
KiCad electrical design of Thelio Io board

It measures 17.8 × 27.5 mm and has 4 copper layers, 1.54 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danstiner/embedded repository on GitHub, at the commit this page was made from: the board is HW/SWD_USBC_InlineAdapter/SWD_USBC_InlineAdapter.kicad_pcb and its schematic HW/BL54L15μ_DevKit/BL54L15μ_DevKit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask danstiner before reusing the design.