

PDM Board mini
A PCB that uses a FAN3852 to convert analog electret microphone data to PDM data. Then a Sigma-Delta ADC can receive the data and create a full PCM signal
- Size
- 31.3 × 26.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 11
- Pads
- 41
- Tracks, vias
- 56, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 May 2026
- Updated
- 7 May 2026
Overview
PDM Board mini is an open-source printed circuit board by DannyCato, from the DannyCato/Electret_To_PDM repository on GitHub, published under the MIT licence. It is a 2-layer board of 31.3 × 26.5 mm with 17 parts on 11 nets, routed with 56 tracks and 10 vias.
It is built around the FAN3852UC16X. Its parts include 5 resistors, 3 capacitors, 2 connectors, 1 IC and 1 inductor. It belongs with the audio and music boards of this library.
Main components
1README
README.mdElectret To PDM
This is a KiCad project that uses a FAN3852 to convert analog electret microphone data to PDM data. It is mounted on a 2-layer PCB with all the parts on the top layer
Additionally, it has grounded mounting pads and a power good LED to see if the connection is working.
Usage
To be used where there is no better option to turn analog microphone signals into a digital signal. In my case, a Sigma-Delta ADC was used to convert the PDM data into PCM data so that it could more easily be converted into a WAV File for our data collection.
A 1-4 MHz Clock signal should be provided for the FAN Chip to produce PDM data.
Connectors
MOLEX SL 70555 series connectors (4 pin for PDM side and 2 pin for Electret side) are used for this board, but switching them out for something else is not difficult
Schematic

Layout
The back layer is almost entire a Ground Plane aside for the few times where wires need to cross over others.

Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 1 | 0.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 705550001 | pdm_board_mini_library:MOLEX_SL_7055501_2PRA | J2 |
| 1 | 705550003 | pdm_board_mini_library:MOLEX_SL_7055503_4PRA | J1 |
| 1 | FAN3852UC16X | pdm_board_mini_library:BGA6C40P2X3_84X124X50 | U1 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the PDM Board mini PCB?
It measures 31.3 × 26.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PDM Board mini use?
17 parts, built around the FAN3852UC16X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PDM Board mini KiCad files?
From the DannyCato/Electret_To_PDM repository on GitHub, at the commit this page was made from: the board is PDM_Board_mini.kicad_pcb and its schematic PDM_Board_mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PDM Board mini design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).