2 layers84.5 × 80.3 mm
2 layers49.5 × 27.9 mm
BatteryESP8266Node
DanNixon/IoT1Various internet connected devices
- Size
- 49.5 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 27
- Pads
- 127
- Tracks, vias
- 104, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 31 Aug 2016
- Updated
- 20 May 2018
Overview
BatteryESP8266Node is an open-source printed circuit board by DanNixon, from the DanNixon/IoT repository on GitHub, published under the MIT licence. It is a 2-layer board of 49.5 × 27.9 mm with 20 parts on 27 nets, routed with 104 tracks and 8 vias.
It is built around the ESP-12E and AP2112K-3.3. Its parts include 7 resistors, 5 connectors, 2 capacitors, 2 ICs and 2 switches. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.
Main components
2
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
README
README.mdIoT
Various internet of things related devices and projects.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistors_SMD:R_0805 | R1, R2, R3, R4, R5, R6 |
| 2 | C | Capacitors_SMD:C_0805 | C1, C2 |
| 1 | 1K | Resistors_SMD:R_0805 | R7 |
| 1 | 3V3 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J5 |
| 1 | AP2112K-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | D | Diodes_SMD:D_0805 | D1 |
| 1 | ESP-12E | ESP8266:ESP-12E_SMD | U1 |
| 1 | Flash | Buttons_Switches_SMD:SW_SPST_KMR2 | SW2 |
| 1 | GND | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J4 |
| 1 | IO | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J3 |
| 1 | Power | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | Reset | Buttons_Switches_SMD:SW_SPST_KMR2 | SW1 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_2x02_Pitch2.54mm | J2 |
The 19 most common of 20 parts.
Similar boards
- 2 layers68 × 49.3 mm
- 2 layers61.2 × 61.2 mm
OpenBCI Wifi Shield
nestorufpe/OpentDCS-Hardware
All design files made with KiCad PCB design software. http://kicad-pcb.org/
35 parts1 - 2 layers21 × 21 mm
Esp8266-board
benvonhandorf/esp8266-board
Non-project-specific ESP8266 ESP-12E board with options for switching or linear power supplies, 5V in, multiple GPIO broken out (WS2812 or APA102 in mind)
26 partsMIT - 2 layers99.1 × 99.1 mm
- 4 layers83 × 26 mm
Smart Powerbank Jukic Sayfutdinov
MAIK97MAX/smartpowerbank2026
A smart powerbank with USB-C charging and active system monitoring
89 parts - 2 layers61.2 × 61.2 mm
OpenBCI Wifi Shield
smarttargettech/isb
Conteúdo do sistema "Interface de Sinais Biológicos"
67 partsMIT - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
Questions
How big is the BatteryESP8266Node PCB?
It measures 49.5 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BatteryESP8266Node use?
20 parts, built around the ESP-12E and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BatteryESP8266Node KiCad files?
From the DanNixon/IoT repository on GitHub, at the commit this page was made from: the board is battery_esp8266_node/BatteryESP8266Node.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BatteryESP8266Node design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).