2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers93.5 × 77.5 mm
LoRa irrigation system
DanMuthomi/FEE560_projectThis is a repository for my BSc. Electrical Engineering final year project
- Size
- 93.5 × 77.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 45
- Pads
- 90
- Tracks, vias
- 151, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Apr 2024
- Updated
- 26 Jun 2024
Overview
LoRa irrigation system is an open-source printed circuit board by DanMuthomi, from the DanMuthomi/FEE560_project repository on GitHub. It is a 2-layer board of 93.5 × 77.5 mm with 14 parts on 45 nets, routed with 151 tracks and 4 vias.
Its parts include 4 connectors, 3 resistors, 3 ICs, 3 diodes and 1 switch. It belongs with the radio and wireless boards and the RP2040 boards of this library.
README
README.mdThis is a repository for my BSc. Electrical Engineering final year project
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3 |
| 1 | 12VIN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_132134_Vertical | J4 |
| 1 | Good moisture LED | LED_THT:LED_D5.0mm_Clear | D2 |
| 1 | LM2596_buck_converter | My_Footprints:LM2596_Buck converter | U1 |
| 1 | RASPBERRY_PI_PICO | RASPBERRY_PI_PICO:RASPBERRY_PI_PICO | U2 |
| 1 | RFM69HCW LoRa module | My_Footprints:RFM69HCW LoRa module | U4 |
| 1 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K2 |
| 1 | SoilMoisture sensor | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | WaterPump connector | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3 |
| 1 | irrigating LED | LED_THT:LED_D5.0mm_Clear | D1 |
| 1 | low moisture LED | LED_THT:LED_D5.0mm_Clear | D3 |
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
Questions
How big is the LoRa irrigation system PCB?
It measures 93.5 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LoRa irrigation system use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoRa irrigation system KiCad files?
From the DanMuthomi/FEE560_project repository on GitHub, at the commit this page was made from: the board is Hardware/LoRa_irrigation_system_v2/LoRa_irrigation_system.kicad_pcb and its schematic Hardware/LoRa_irrigation_system/LoRa_irrigation_system.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoRa irrigation system design in my own project?
Its repository states no licence, so its author keeps all rights: ask DanMuthomi before reusing the design.