
STM32F030K6T6TR Devel
danielvilas/STM32-kicad-reference-designs
Reference Designs for STM32 in KiCad

Reference Designs for STM32 in KiCad
STM32103 Devel is an open-source printed circuit board by danielvilas, from the danielvilas/STM32-kicad-reference-designs repository on GitHub, published under the MIT licence. It is a 4-layer board of 69 × 50 mm with 52 parts on 55 nets, routed with 671 tracks and 62 vias.
It is built around the AMS1117-3.3 and SS14. Its parts include 15 capacitors, 12 resistors, 7 connectors, 4 diodes and 2 ICs. It belongs with the STM32 boards of this library.
STM32F103 Board for development with STM32F103CB chip. The intention of this project is to have my own basic board for this chip in order to design custom boards which use the STM32103CB chip.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R5, R11, R12 |
| 5 | 100nf | Capacitor_SMD:C_0805_2012Metric | C1, C6, C7, C8, C11 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C12, C15 |
| 2 | 10pf | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 10uH | Inductor_SMD:L_0805_2012Metric | L1, L2 |
| 2 | 10uf | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C10, C14 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R4, R6 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C9, C13 |
| 2 | 20 | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 20pf | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | Conn_01x16 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J3 |
| 2 | sj_o | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 1K5 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | Conn_02x05 Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J6 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | STM32F103CBTx | STM32103_Devel:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W8.61mm_P2.54mm_LowProfile | SW2 |
| 1 | SW_Push | STM32103_Devel:SW_PTS526_SM08_SMTR2_LFS | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J2 |
| 1 | ss14 | Diode_SMD:D_SMA | D4 |

danielvilas/STM32-kicad-reference-designs
Reference Designs for STM32 in KiCad

danielvilas/STM32-kicad-reference-designs
Reference Designs for STM32 in KiCad

OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications


nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible


AleksaHeler/OpenHand
Our attempt at a prosthetic hand using STM32 microcontroller with custom PCB and mechanics

luftaquila/fsk-energymeter
E-Formula electric energy meter for Formula Student Korea

ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.
It measures 69 × 50 mm and has 4 copper layers, 1.6 mm thick.
52 parts, built around the AMS1117-3.3 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielvilas/STM32-kicad-reference-designs repository on GitHub, at the commit this page was made from: the board is STM32F1/STM32F103/STM32F103CBT8_Devel/STM32103_Devel.kicad_pcb and its schematic STM32F0/STM32F030/STM32F030K6T6TR_Devel/STM32F030K6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).