Skip to the content
2 layers140 × 77 mmPlaca Mae, the printed circuit board in 3D

Repository for thesis writing, simulations, embedded experiments, presentations, publications, and supporting research material.

Size
140 × 77 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
19
Pads
102
Tracks, vias
247, 38
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 May 2022
Updated
29 Oct 2026

Overview

Placa Mae is an open-source printed circuit board by danielvie, from the danielvie/doutorado repository on GitHub. It is a 2-layer board of 140 × 77 mm with 30 parts on 19 nets, routed with 247 tracks and 38 vias.

Its parts include 10 connectors, 4 capacitors, 4 resistors and 2 switches.

README

README.md

Doutorado

Repository for thesis writing, simulations, embedded experiments, presentations, publications, and supporting research material.

Quick links

Where to go

NeedGo to
Thesis and paper LaTeX sourcesLATEX/
Plans, TODOs, and qualification materialresearch-material/planning/
Reviewer commentsresearch-material/review-feedback/
Authored analysis and meeting notesresearch-material/working-notes/
Shared diagrams and writing assetsassets/
Current MATLAB simulations/control codesimulations/matlab-sim/
Older MATLAB simulationssimulations/legacy/
Projection/feasibility-region MATLAB worksimulations/projection/
ESP32 firmware, hardware docs, and web UIembedded/
External papers, books, theses, and course materialresearch-material/literature/
Presentations and slidespresentations/
External/vendor materialz_dependencies/, z_kawa/, z_mpt_install/, and z_qpoases/

Common commands

This repository uses Taskfile.yml:

sh
task --list

Important tasks:

  • task run opens generated overview documentation.
  • task test validates generated overview documentation.
  • task clean removes generated overview documentation.
  • task update-tese copies LATEX/thesis/build/tese.pdf to the repository root.

Navigation conventions

  • Start from this README, then use docs/REPO_MAP.md for locations and CONTEXT.md for terminology.
  • Prefer area-specific READMEs/docs when they exist.
  • Treat z_dependencies/, z_kawa/, z_mpt_install/, z_qpoases/, and simulations/backup/ as backup, vendored, or auxiliary material unless a task explicitly points there.
  • Prefer simulations/matlab-sim/ over simulations/legacy/ for current simulation work.
  • Prefer embedded/esp32_idf/ for current ESP32 firmware work.
  • Avoid adding new loose files at the repository root; put new material in the closest project area.
  • Keep document navigation folders at most three levels deep. Self-contained source/build trees are exempt when flattening would break them.

Parts

30
QtyValueFootprintReferences
10TestPoint_ProbeTestPoint:TestPoint_Bridge_Pitch5.08mm_Drill0.7mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10
6SwitchTerminalBlock:TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_HorizontalJ1, J2, J3, J4, J5, J6
2100uF/25VCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC3, C4
21kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2, R3
22u2/100VCapacitor_THT:C_Rect_L29.0mm_W9.1mm_P27.50mm_MKTC1, C2
2AmpOpTerminalBlock:TerminalBlock_Xinya_XY308-2.54-6P_1x06_P2.54mm_HorizontalJ8, J9
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H7.3mmSW1, SW2
1220RResistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P25.40mm_HorizontalR4
168RResistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P25.40mm_HorizontalR1
1Conn_02x07_Odd_EvenConnector_IDC:IDC-Header_2x07_P2.54mm_VerticalJ12
1InductorTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ7

More from danielvie/doutorado

2
  • 2 layers75 × 44 mmPlacaESP, the printed circuit board in 3D

    PlacaESP

    danielvie/doutorado

    Repository for thesis writing, simulations, embedded experiments, presentations, publications, and supporting research material.

    17 parts
  • 2 layers25 × 25 mmPlaca Carga, the printed circuit board in 3D

    Placa Carga

    danielvie/doutorado

    Repository for thesis writing, simulations, embedded experiments, presentations, publications, and supporting research material.

    12 parts

Similar boards

  • 2 layers52.2 × 52.2 mmBase promicro, the printed circuit board in 3D

    Base promicro

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    30 parts3kApache-2.0
  • 2 layers40.6 × 15.2 mmVr mmm, the printed circuit board in 3D

    Vr mmm

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    30 parts1.2k
  • 2 layers270 × 11 mmDaylight, the printed circuit board in 3D

    Daylight

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    30 parts1.1kGPL-3.0
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    30 parts1kGPL-3.0
  • 2 layers40.5 × 58 mmInitial v, the printed circuit board in 3D

    Initial v

    tenderlove/initial-v

    It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

    30 parts1kApache-2.0
  • 2 layers34.3 × 41.8 mmMotionCubeViewAllForces, the printed circuit board in 3D

    MotionCubeViewAllForces

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    30 parts915
  • 2 layers57.4 × 62 mmPicoWS2812, the printed circuit board in 3D

    PicoWS2812

    ErichStyger/mcuoneclipse

    McuOnEclipse projects and examples

    30 parts765
  • 2 layers52.1 × 46.8 mmFIRE TEST PANEL, the printed circuit board in 3D

    FIRE TEST PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    30 parts431

Questions

How big is the Placa Mae PCB?

It measures 140 × 77 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Placa Mae use?

30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Placa Mae KiCad files?

From the danielvie/doutorado repository on GitHub, at the commit this page was made from: the board is embedded/kicad/PlacaDaniel/PlacaMae_Rev3/Placa_Mae.kicad_pcb and its schematic embedded/kicad/PlacaDaniel/PlacaESP_Rev3/PlacaESP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Placa Mae design in my own project?

Its repository states no licence, so its author keeps all rights: ask danielvie before reusing the design.