2 layers68 × 82 mm
Default esp32 board
apmm-25/trator_gps_hardware
This repository will hold the hardware for the tractor GPS connection board, leveraging an ESP32 microcontroller
60 parts
2 layers170 × 115 mm
Pcb control
Danielnvcd/PCBPCB WIEGAND
- Size
- 170 × 115 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 60
- Pads
- 190
- Tracks, vias
- 351, 11
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Aug 2026
- Updated
- 25 Aug 2026
Overview
Pcb control is an open-source printed circuit board by Danielnvcd, from the Danielnvcd/PCB repository on GitHub. It is a 2-layer board of 170 × 115 mm with 65 parts on 60 nets, routed with 351 tracks and 11 vias.
It is built around the ULN2003A, P6KE6.8CA and BC337, with the SRD-12VDC-SL-C and SB340 among its other parts. Its parts include 25 resistors, 11 capacitors, 10 diodes, 7 connectors and 2 ICs.
Main components
5
ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
P6KE6.8CA
DO-15-55℃~+175℃ 10.5V 1mA 5.8V 57.1A@10/1000us 600W@10/1000us 7.14V Bidirectional TVS DO-15 ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
SRD-12VDC-SL-C
插件,19.2x15.6mm100mΩ 10ms 10ms 12V 15A 250V@AC 360mW 400Ω 5 Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) 插件,19.2x15.6mm Power Relays ROHS松乐Power RelaysSB340
DO-27-55℃~+150℃ 3A 40V 500uA@40V 550mV@3A 80A Independent DO-27 Schottky Diodes ROHSYFWSchottky Diodes
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R11, R15, R16, R19, R20, R21 |
| 4 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R12, R13, R14 |
| 4 | 1nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C5, C6, C7 |
| 4 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5, R6 |
| 4 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R7, R8 |
| 4 | 4.7k DNP | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22, R23, R24, R25 |
| 4 | MountingHole_3.2mm_M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | P6KE6.8CA | D_DO-15_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 3 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C8, C9 |
| 2 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R18 |
| 2 | 100nF/250V | C_Disc_D7.5mm_W5.0mm_P7.50mm | C10, C11 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D5, D6 |
| 2 | BC337 | TO-92_Inline | Q1, Q2 |
| 2 | SRD-12VDC-SL-C | Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2 |
| 1 | 100uF/25V | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 12V IN | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | Arduino Nano v3 | Arduino_Nano | A1 |
| 1 | BOTON SAL. 1 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J6 |
| 1 | BOTON SAL. 2 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J7 |
| 1 | LECTOR 1 | TerminalBlock_MaiXu_MX126-5.0-07P_1x07_P5.00mm | J2 |
| 1 | LECTOR 2 | TerminalBlock_MaiXu_MX126-5.0-07P_1x07_P5.00mm | J3 |
| 1 | MP1584 buck 12V->5V | PinHeader_1x04_P2.54mm_Vertical | U1 |
| 1 | PTC 1.1A | Fuse_Bourns_MF-RHT100 | F1 |
| 1 | PUERTA 1 | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J4 |
| 1 | PUERTA 2 | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J5 |
| 1 | PWR verde | LED_D3.0mm | LED1 |
| 1 | RELE1 rojo | LED_D3.0mm | LED2 |
| 1 | RELE2 rojo | LED_D3.0mm | LED3 |
| 1 | SB340 | D_DO-201AD_P12.70mm_Horizontal | D7 |
| 1 | ULN2003A | DIP-16_W7.62mm | U2 |
Questions
How big is the Pcb control PCB?
It measures 170 × 115 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb control use?
65 parts, built around the ULN2003A, P6KE6.8CA, BC337 and SRD-12VDC-SL-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb control KiCad files?
From the Danielnvcd/PCB repository on GitHub, at the commit this page was made from: the board is pcb_control.kicad_pcb and its schematic pcb_control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb control design in my own project?
Its repository states no licence, so its author keeps all rights: ask Danielnvcd before reusing the design.
Similar boards
- 2 layers139.7 × 139.7 mm
- 2 layers105 × 85 mm
Recorder
akiihito/expresslrs_realtime_recorder
USB Gamepad to ExpressLRS adapter using Raspberry Pi Pico
30 parts - 4 layers81 × 114 mm
Phonev6
kmatzen/millennium
I took an old pay phone from the 2000's and replaced the brains with a raspberry pi and some arduinos.
64 partsMIT - 2 layers68 × 76 mm
Screen power hand
tomassasovsky/segno-hardware
Segno hardware: boards, sheet-metal enclosure, printed parts and decals
46 partsCERN-OHL-S-2.0 - 4 layers188 × 90.2 mm
- 2 layers100 × 80 mm
- 2 layers123 × 87.3 mm
