FPGA UBB Quantum Optics Lab
FPGA project for the control system of the OAM experiment. FPGA stores a set of images in a DDR memory, displays such images via HDMI port, prepares a train of short pulses to drive an EOM Intensity modulator, and aquires counts from 2 detectors. This project is meant to work along a GUI written in C#.
- electronics contains the source files for the FMC PCB and the LM7171 AMP PCB. These includes manufacturing files, schematics and PCB outlines
- caja contains a blender file with the mechanical drawings of the plastic box for the project
- Figuras_Hologramas_OAM contains a set of holograms to display, and some images with numbers for calibration
- FPGA-Vivado-Project contains the main Vivado project in
Genesys2_VideoDemoR1 and its sources in srcs. You can use the project as it is ot build the project by your own running the srcs/Genesys2_VideoDemoR1.tcl file with their respective dependencies and then build your own project. Synthesis, implementation and bitstream generation
- GUI includes the main Graphical User Interface (GUI) to run the program along with the FPGA project. C# project in
SOFTWARE BASE-UART and final GUI in FINAL. Notice that a USB UART connection is required to transmit information from the FPGA to PC 115200 buad rate.
GUI
C# project in GUI\SOFTWARE BASE-UART\ and FINAL Graphical User Interface (GUI), located in GUI\SOFTWARE BASE-UART\driver_PM_software\bin\Debug\driver_PM_software.exe
GUI controls
FPGA
- Main Vivado project in
FPGA-Vivado-Project\Genesys2_VideoDemoR1,
- Final bitstream is located in
FPGA-Vivado-Project\Genesys2_VideoDemoR1\Genesys2_VideoDemoR1.runs\impl_1\*.bit.
- You can upload this file into the FPGA using Vivado. Left bottom menu, PROGRAM AND DEBUG, Open Hardware, Auto connect, Program FPGA (with the .bit file)
srcs contains all verilog files, please keep this updated
How to use this repo?
- Create a GitHub account
- Download Github desktop
- CLONE the repository (ask me for access since it is a private repo)
- If you want to use this files and not modify them CLONE this repository in the MAIN branch.
- If you want to modify it create a new branch and have fun
- Now all the files are in the folder where you cloned the repo.
- If you want to make permanet changes to the MAIN branch, make a commit, but ask me first
- GitHub is not meant to store experiment data, but code, keep this repo as clean as possible.