

Mosfet board
- Size
- 41.7 × 71.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 44
- Pads
- 178
- Tracks, vias
- 158, 24
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Apr 2024
- Updated
- 1 Apr 2024
Overview
Mosfet board is an open-source printed circuit board by danielkucera, from the danielkucera/pmosfet-board repository on GitHub. It is a 2-layer board of 41.7 × 71.1 mm with 54 parts on 44 nets, routed with 158 tracks and 24 vias.
Its parts include 24 resistors, 8 ICs, 8 diodes, 8 transistors and 6 connectors.
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | PC817 | Package_DIP:DIP-4_W8.89mm_SMDSocket_LongPads | U1, U2, U3, U4, U5, U6, U7, U8 |
| 8 | Q_PMOS_GDS | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4, J5 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J6 |
| 1 | Conn_01x12_Pin | danman:CONN-TH_12P-P5.08_HT508R-5.08-12P | J1 |
Similar boards
- 2 layers203 × 26.6 mm

- 2 layers30 × 50 mm

- 2 layers100.1 × 40 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
54 parts766 - 2 layers100 × 120 mm

- 2 layers

- 2 layers104.3 × 38.9 mm

- 2 layers

- 2 layers93.8 × 64.2 mm

PiFinder smt
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
54 parts257GPL-3.0
Questions
How big is the Mosfet board PCB?
It measures 41.7 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mosfet board use?
54 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mosfet board KiCad files?
From the danielkucera/pmosfet-board repository on GitHub, at the commit this page was made from: the board is mosfet-board.kicad_pcb and its schematic mosfet-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mosfet board design in my own project?
Its repository states no licence, so its author keeps all rights: ask danielkucera before reusing the design.