2 layers90.8 × 35.6 mm
ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode
28 parts195GPL-3.0
2 layers
Camera Slider Circuit
Danielgeitz/Camera-SliderA Motorized Camera Slider with an ESP32 controlled via a web Interface
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 63
- Pads
- 88
- Tracks, vias
- 109, 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 May 2026
- Updated
- 19 Jul 2026
Overview
Camera Slider Circuit is an open-source printed circuit board by Danielgeitz, from the Danielgeitz/Camera-Slider repository on GitHub. It is a 2-layer board with 4 parts on 63 nets, routed with 109 tracks and 3 vias.
It is built around the TMC2209SILENTSTEPSTICK. It belongs with the ESP32 and ESP8266 boards of this library.
Main components
1README
README.mdCamera-Slider
A Motorized Camera Slider with an ESP32 controlled via a web Interface
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | TMC2209_SILENTSTEPSTICK | MyFootprints:MODULE_TMC2209_SILENTSTEPSTICK | U2, U4, U5 |
| 1 | ESP32 NodeMCU_Amazon | node_mcu:MODULE_DEVKIT_V1_ESP32-WROOM-32 | U1 |
Questions
What parts does the Camera Slider Circuit use?
4 parts, built around the TMC2209SILENTSTEPSTICK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Camera Slider Circuit KiCad files?
From the Danielgeitz/Camera-Slider repository on GitHub, at the commit this page was made from: the board is Circuit/Camera_Slider_Circuit/Camera_Slider_Circuit.kicad_pcb and its schematic Circuit/Camera_Slider_Circuit/Camera_Slider_Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Camera Slider Circuit design in my own project?
Its repository states no licence, so its author keeps all rights: ask Danielgeitz before reusing the design.
Similar boards
- 2 layers113.4 × 55.3 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 4 layers130.5 × 171 mm
UniMixBase
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
157 parts6 - 2 layers91.6 × 65 mm
- 2 layers185.7 × 101.9 mm
- 4 layers102 × 102 mm
Controller
Angelo13C/3d-printer
Firmware, electronics, mechanics and control interface of a 3D printer
97 parts2 - 2 layers24.5 × 49.4 mm
Roller blind controller
ItsRebaseTime/turbomansion
Hello, welcome to the turbomansion repository.
6 parts2Unlicense