2 layers49.6 × 78.3 mm
Odyssey
jotego/jtcores
FPGA cores compatible with multiple arcade game machines and KiCAD schematics of arcade games. Working on MiSTer FPGA/Analogue Pocket
24 parts346GPL-3.0
2 layers218.4 × 127 mm
Kerbal Controller PCB
Daniel-Wareham/kerbal-controller37An Arduino custom controller for Kerbal Space Program
- Size
- 218.4 × 127 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 155
- Nets
- 70
- Pads
- 358
- Tracks, vias
- 345, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Aug 2020
- Updated
- 31 Aug 2020
Overview
Kerbal Controller PCB is an open-source printed circuit board by Daniel-Wareham, from the Daniel-Wareham/kerbal-controller repository on GitHub. It is a 2-layer board of 218.4 × 127 mm with 155 parts on 70 nets, routed with 345 tracks and 30 vias.
It is built around the 74LS86. Its parts include 62 diodes, 56 resistors, 26 switches, 4 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdkerbal-controller
An Arduino custom controller for Kerbal Space Program
Read the project log for my process in building the controller Read the technical explanation for explanations on both the software and hardware
Parts
155| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | D | Diode_THT:D_A-405_P7.62mm_Horizontal | D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41 +21 |
| 31 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R10, R11, R12, R13, R15, R19, R20, R22, R25, R26, R27, R28, R31, R32 +15 |
| 25 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R14, R16, R17, R18, R21, R23, R24, R29, R30, R35, R36, R41, R42, R45 +9 |
| 22 | Red | LED_THT:LED_D5.0mm | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +6 |
| 2 | Green | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 74LS08 | Package_DIP:DIP-14_W7.62mm_LongPads | U2 |
| 1 | 74LS86 | Package_DIP:DIP-14_W7.62mm_LongPads | U3 |
| 1 | AG1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW5 |
| 1 | AG10 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW15 |
| 1 | AG2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW8 |
| 1 | AG3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW10 |
| 1 | AG4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW12 |
| 1 | AG5 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW14 |
| 1 | AG6 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW6 |
| 1 | AG7 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW9 |
| 1 | AG8 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW11 |
| 1 | AG9 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW13 |
| 1 | Abort button | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW7 |
| 1 | Gears | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW21 |
| 1 | LED_RGBC | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | D3 |
| 1 | Lights | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW23 |
| 1 | Load | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW16 |
| 1 | Map | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW24 |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | RCS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW19 |
| 1 | SAS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW17 |
| 1 | Save | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW18 |
| 1 | Time+ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW22 |
| 1 | Time- | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW20 |
| 1 | mode | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW25 |
| 1 | reset | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW26 |
| 1 | stage arm | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW4 |
| 1 | stage button | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | stick1 button | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | stick2 button | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | wPot | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | xPot | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | yPot | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | zPot | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
The 151 most common of 155 parts.
Questions
How big is the Kerbal Controller PCB PCB?
It measures 218.4 × 127 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kerbal Controller PCB use?
155 parts, built around the 74LS86. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kerbal Controller PCB KiCad files?
From the Daniel-Wareham/kerbal-controller repository on GitHub, at the commit this page was made from: the board is Kerbal Controller PCB/Kerbal Controller PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kerbal Controller PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Daniel-Wareham before reusing the design.
Similar boards
- 2 layers370.8 × 298.5 mm
8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers304.8 × 165.1 mm
Comix-35
schlae/comix-35
The COMIX-35 is an improved clone of the COMX-35 1802 home computer
173 parts138 - 4 layers149.9 × 110 mm
- 4 layers337.6 × 105.7 mm
ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 2 layers189.7 × 95.9 mm
ISACard
profdc9/ISACard
A ISA card for PC/XT/AT that has SD storage and SPI/I2C interfaces using a ATMEGA328P
101 parts46 - 2 layers100 × 77.5 mm
LanguageCard
btb/LanguageCard
An Apple II Language Card. Based on a design by iz8dwf
42 parts45Apache-2.0 - 2 layers155.2 × 78.6 mm
80ColumnCard
btb/80ColumnCard
An Apple II 80-Column Card. Based on the Videx Videoterm
47 parts43Apache-2.0