
GVH CounterContoller
daniel-bornhorst/GVH-ALY-PM-InteractiveCounter
GVH Alley Bar - Prime Materia - Interactive Cap Touch Countertop

GVH Alley Bar - Prime Materia - Interactive Cap Touch Countertop
GVH InteractiveCounter is an open-source printed circuit board by daniel-bornhorst, from the daniel-bornhorst/GVH-ALY-PM-InteractiveCounter repository on GitHub. It is a 2-layer board of 317.5 × 25.4 mm with 92 parts on 62 nets, routed with 423 tracks and 77 vias.
It is built around the SN74LVC2G17DBV, AT42QT1010-TSH and L7805, with the SN74HC165DR(LX) among its other parts. Its parts include 20 capacitors, 18 resistors, 18 connectors, 11 ICs and 8 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5, C7, C9, C11, C13, C15, C17, C20, C22 |
| 8 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6, R8, R10, R12, R14, R16 |
| 8 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5, R7, R9, R11, R13, R15 |
| 8 | 22nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C6, C8, C10, C12, C14, C16 |
| 8 | AT42QT1010 | 0_sensor:AT42QT1010-TSGR_1 | U1, U2, U3, U4, U5, U6, U7, U10 |
| 8 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12, J13, J14, J15, J16, J17, J18, J19 |
| 8 | Electrode | Connector_Pin:Pin_D1.0mm_L10.0mm | J4, J5, J6, J7, J8, J9, J10, J11 |
| 8 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 8 | Touch_Indicator | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18 |
| 2 | Molex Micro-Fit | 0_connector:Molex_Micro-Fit_3.0_1x05_Horizontal_Vertical_Combo | J1, J2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP16, JP17 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP14, JP15 |
| 1 | 0.33uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U11 |
| 1 | LOGO | 0_logo:UL_Mark_15mm_JLC_Single_Layer | G*** |
| 1 | LOGO | 0_logo:MW_Logo_Horizontal_2.0inch | G*** |
| 1 | LOGO | 0_logo:MW_Mark_0.50inch | G*** |
| 1 | SN74HC165DR | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | SN74LVC2G17 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U13 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP11 |
The 91 most common of 92 parts.

daniel-bornhorst/GVH-ALY-PM-InteractiveCounter
GVH Alley Bar - Prime Materia - Interactive Cap Touch Countertop

daniel-bornhorst/GVH-ALY-PM-InteractiveCounter
GVH Alley Bar - Prime Materia - Interactive Cap Touch Countertop

daniel-bornhorst/GVH-ALY-PM-InteractiveCounter
GVH Alley Bar - Prime Materia - Interactive Cap Touch Countertop

daniel-bornhorst/GVH-ALY-PM-InteractiveCounter
GVH Alley Bar - Prime Materia - Interactive Cap Touch Countertop



daniel-bornhorst/GVH-POR-SpaceSuitScanner
Biometrix hand scanner interactive used to activate forgotten pocket space suit.

oomlout/oomlout_oomp_project_bot_v_2
.kicad_pcb.jpg?size=s&soon)
sifourquier/domotic_esp_hardware
hardware for a system based on esp8266

rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)


It measures 317.5 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
92 parts, built around the SN74LVC2G17DBV, AT42QT1010-TSH, L7805 and SN74HC165DR(LX). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the daniel-bornhorst/GVH-ALY-PM-InteractiveCounter repository on GitHub, at the commit this page was made from: the board is Hardware/GVH_InteractiveCounter/GVH_InteractiveCounter.kicad_pcb and its schematic Hardware/Archive/GVH_CounterController_take1/CounterContoller_take1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask daniel-bornhorst before reusing the design.