

KiCad Projects
Schematic and PCB design files for custom electronic projects created in KiCad.
- Size
- 74 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 51
- Pads
- 129
- Tracks, vias
- 205, 15
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Aug 2026
- Updated
- 17 Aug 2026
Overview
KiCad Projects is an open-source printed circuit board by DamianRodko, from the DamianRodko/KiCad-Projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 74 × 66 mm with 45 parts on 51 nets, routed with 205 tracks and 15 vias.
Its parts include 12 connectors, 11 capacitors and 9 resistors. It belongs with the ESP32 boards of this library.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF 50V | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C6, C8, C9, C13 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6, R9 |
| 2 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R5 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 100uF 16V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 10nF 50V | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C12 |
| 1 | 10uF 25V | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C7 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 220uF 25V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 330k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 3V3 | RC_Custom:TestPoint_THT_D2_Drill1 | TP4 |
| 1 | 3V3 LINK | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | 3V3 RAW | RC_Custom:TestPoint_THT_D2_Drill1 | TP3 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 470uF 16V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 6V | RC_Custom:TestPoint_THT_D2_Drill1 | TP2 |
| 1 | A3144 REMOTE | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | BEC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | BuckIn+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | BuckIn- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | BuckOut+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | BuckOut- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | CJMCU-20948 | RC_Custom:CJMCU-20948_Socket_1x10_P2.54mm | J11 |
| 1 | CJVL53L0XV2 | RC_Custom:CJVL53L0XV2_RightAngle_1x06_P2.54mm | J10 |
| 1 | ESC PWM | RC_Custom:TestPoint_THT_D2_Drill1 | TP7 |
| 1 | ESP32L | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J2 |
| 1 | ESP32R | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J3 |
| 1 | GND | RC_Custom:TestPoint_THT_D2_Drill1 | TP1 |
| 1 | MG90 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | SERVO PWM | RC_Custom:TestPoint_THT_D2_Drill1 | TP8 |
| 1 | VBAT | RC_Custom:TestPoint_THT_D2_Drill1 | TP5 |
| 1 | VBAT SENSE | RC_Custom:TestPoint_THT_D2_Drill1 | TP6 |
| 1 | VBAT_SENSE_IN | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J8 |
Similar boards
- 2 layers30 × 61.3 mm

- 2 layers97 × 78.5 mm

Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm

- 2 layers26.5 × 34.4 mm

PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm

- 2 layers63.5 × 63.5 mm

Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers99.1 × 81.9 mm

RC6502 Terminal
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
45 parts193GPL-3.0 - 2 layers116.1 × 94.7 mm

Questions
How big is the KiCad Projects PCB?
It measures 74 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KiCad Projects use?
45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiCad Projects KiCad files?
From the DamianRodko/KiCad-Projects repository on GitHub, at the commit this page was made from: the board is RC/RC.kicad_pcb and its schematic RC/RC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiCad Projects design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).