Skip to the content
6 layersNixie Block, the printed circuit board in 3D
Copper layers
6
Thickness
1.6 mm
Parts
25
Nets
38
Pads
73
Tracks, vias
56, 12
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 Sep 2024
Updated
24 Mar 2025

Overview

Nixie Block is an open-source printed circuit board by dalvador2, from the dalvador2/nixie_clock repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board with 25 parts on 38 nets, routed with 56 tracks and 12 vias.

Its parts include 12 resistors and 12 ICs. It belongs with the lEDs and displays boards of this library.

Parts

25
QtyValueFootprintReferences
12MSD42WT1Gfootprints:SOT-323-3_2P2X1P35_ONSU1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12
101KResistor_SMD:R_0603_1608MetricR2, R3, R4, R5, R6, R8, R9, R10, R11, R12
27K87Resistor_SMD:R_0603_1608MetricR1, R7
1IN14Nixie_Stuff:IN14V1

More from dalvador2/nixie_clock

3
  • 6 layers225.3 × 53.3 mmNixie clock, the printed circuit board in 3D

    Nixie clock

    dalvador2/nixie_clock

    182 partsGPL-3.0
  • 6 layersNixie clock, the printed circuit board in 3D

    Nixie clock

    dalvador2/nixie_clock

    174 partsGPL-3.0

Similar boards

  • 6 layers8 × 10 mmPicoM10 bld bak, the printed circuit board in 3D

    PicoM10 bld bak

    makerprobe/PicoM10

    A pretty small ublox MIA-M10Q based GNSS module

    25 parts1MIT
  • 6 layers30.5 × 22 mmBugg mic r4, the printed circuit board in 3D

    Bugg mic r4

    bugg-resources/bugg-hardware-mic

    This repository contains the KiCad source files for the microphone PCB of the Bugg recording device.

    25 parts
  • 6 layers128.8 × 60 mmCard full, the printed circuit board in 3D

    Card full

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    25 partsAGPL-3.0
  • 6 layers45 × 15 mmLogiBlock, the printed circuit board in 3D

    LogiBlock

    Clamentos/LogiBlock

    A basic discrete FPGA logic cell

    25 partsCC-BY-SA-4.0
  • 6 layers48.6 × 28.4 mmPmod Matrix2, the printed circuit board in 3D

    Pmod Matrix2

    Lathe-Mariel/Pmod

    Pmod boards

    25 parts
  • 6 layers73 × 50 mmSoft starter, the printed circuit board in 3D

    Soft starter

    Susensio/soft-starter

    Arduino project for soft start led strips, imitating incandescent bulbs

    24 parts
  • 6 layers188 × 66.8 mmU2CEM, the printed circuit board in 3D

    U2CEM

    oxidecomputer/hw-k2

    This design provides a PCIe extender that converts from a U.2 PCIe device connector and provides a x4 PCIe CEM slot.

    24 partsMPL-2.0
  • 6 layers340 × 126 mmBackplane, the printed circuit board in 3D

    Backplane

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    24 parts2CERN-OHL-S-2.0

Questions

What parts does the Nixie Block use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nixie Block KiCad files?

From the dalvador2/nixie_clock repository on GitHub, at the commit this page was made from: the board is pcb/nixie_clock/Nixie_Block.kicad_pcb and its schematic pcb/nixie_clock/Nixie_Block.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nixie Block design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).