
MCL68
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

the title
Ballin balloon bayload is an open-source printed circuit board by daheehee, from the daheehee/ballin-balloon-bayload repository on GitHub. It is a 4-layer board of 73 × 86 mm with 13 parts on 66 nets.
Its parts include 5 connectors, 3 ICs and 2 resistors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x06_Pin | Connector_Molex:Molex_PicoBlade_53047-0610_1x06_P1.25mm_Vertical | J4, J5 |
| 2 | Molex 0510211000 | Connector_Molex:Molex_PicoBlade_53047-1010_1x10_P1.25mm_Vertical | J1, J3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 2472 | footpriont:adafruit_IMU_2472 | U3 |
| 1 | 3073 | footpriont:Adafruit_RFM96W_LoRa_Radio_3073 | U2 |
| 1 | Adafruit_Feather_HUZZAH32_ESP32 | Module:Adafruit_Feather | A1 |
| 1 | MICROSD_SPI_OR_SDIO_CARD | footpriont:MODULE_MICROSD_SPI_OR_SDIO_CARD | U1 |
| 1 | Molex 0532611071 | footprints-extra:CONN_532610001-SD_10_MOL | J2 |

MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

loxodes/vna
Under development open hardware microwave vector network analyzer


Protocentral/healthypi-move-hw
Hardware files for the HealthyPi Move


felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

Unified-Daughterboard/UDB-C-EZM
For more details on the Unified Daughterboard project, see the main website.
It measures 73 × 86 mm and has 4 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the daheehee/ballin-balloon-bayload repository on GitHub, at the commit this page was made from: the board is ballin balloon bayload.kicad_pcb and its schematic ballin balloon bayload.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask daheehee before reusing the design.