
Power
da-penguin-guy/PiPortable
This is a project that is designed to shove a CM5, a huge battery, and the pi touchscreen into a handheld form-factor.

This is a project that is designed to shove a CM5, a huge battery, and the pi touchscreen into a handheld form-factor.
PiPortable is an open-source printed circuit board by da-penguin-guy, from the da-penguin-guy/PiPortable repository on GitHub. It is a 6-layer board of 182 × 101 mm with 91 parts on 330 nets, routed with 1 track and 0 vias.
It is built around the 74HC4051, PINA780BIDEKR and TPS25730SRSMR, with the KT-0603R, CSD17577Q3A and ABM8-24.000MHZ-D1G-T among its other parts. Its parts include 28 connectors, 13 resistors, 13 ICs, 8 diodes and 4 transistors. It belongs with the Raspberry Pi (Linux) boards of this library.
This is a project that is designed to shove a CM5, a huge battery, and the pi touchscreen into a handheld form-factor. This is meant to help with troubleshooting for audio engineers, although the code is being designed to be very open, allowing you to add your own apps to the launcher and create custom IO Cards
The code can be found in the folder labeled "Source Code." Good luck.
¯_(ツ)_/¯
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP4, TP5, TP13, TP14, TP15, TP16, TP17, TP18 |
| 7 | 50Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R7, R36, R37, R38, R39, R41 |
| 6 | 74HC4051 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U7, U8, U9, U10, U11, U13 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4, H5, H6 |
| 5 | Conn_01x12_Pin | Connector_PinHeader_1.27mm:PinHeader_1x12_P1.27mm_Vertical | J16, J17, J26, J28, J29 |
| 5 | KT-0603R | LED_SMD:LED_0603_1608Metric | D5, D6, D7, D8, D9 |
| 4 | Conn_01x06_Pin | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J19, J21, J23, J25 |
| 4 | Conn_02x10_Odd_Even | Connector_PinSocket_2.00mm:PinSocket_2x10_P2.00mm_Horizontal | J18, J20, J22, J24 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J2, J3, J27 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | 470Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5 |
| 2 | CSD17577Q3A | Package_SON:VSON-8_3.3x3.3mm_P0.65mm_NexFET | Q9, Q10 |
| 2 | HDMI_A_1.4 | Connector_Video:HDMI_A_Molex_208658-1001_Horizontal | J6, J8 |
| 2 | LED Green | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 2 | TPD4EUSB30 | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U1, U2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D3.0mm | TP6, TP19 |
| 1 | 100kΩ | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R40 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 12kΩ | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 1kΩ | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C33 |
| 1 | ABM8-24.000MHZ-D1G-T | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | ASEK-32.768KHZ-L-R-T | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | Bus_M.2_Socket_M | CM5IO:M.2 M Key socket | J14 |
| 1 | ComputeModule5-CM5 | CM5IO:Raspberry-Pi-5-Compute-Module | Module1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J15 |
| 1 | Conn_01x22_Female | CM5IO:Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal | J5 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x08_P1.27mm_Vertical | J12 |
| 1 | JST_SHBM04B-SRSS-TB | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J11 |
| 1 | LED Red | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | MCP23017_ML | Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm | U6 |
| 1 | MagJack-A70-112-331N126 | CM5IO:TRJG0926HENL | U3 |
| 1 | PINA780BIDEKR | Library:VQFN15_DEK_TEX | U4 |
| 1 | RTC Connector | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J13 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J10 |
| 1 | THD-02-R | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J9 |
| 1 | TPS25730SRSMR | Library:RSM0032B-IPC_A | U16 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | USB2514B_Bi | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U5 |
| 1 | USB3_A | Connector_USB:USB3_A_Molex_48393-001 | J4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A | J1 |

da-penguin-guy/PiPortable
This is a project that is designed to shove a CM5, a huge battery, and the pi touchscreen into a handheld form-factor.





farhad-ekramitalab/LM5141-Synchronous-Buck-Converter
12V to 3.3V 5A synchronous buck converter using TI LM5141-Q1. Complete design flow including LTspice simulation, control-loop design, KiCad schematic, PCB layout, and hardware validation.

Guiimartinho/open-power-profiler
Open-source PPK2-class power profiler built on the Raspberry Pi Pico 2: 100 kSPS, 100 nA to 1 A auto-ranging, source meter and ampere meter modes, USB stream.

jacksonyann29/Pico_Balance
General Purpose Robot PCB with 2 motor drivers, IMU and appropriate power management for 9-24v. Intended to be used standalone or alongside a computer depending on robotics application.

Open-Air-Foundation/pcb-openair-max-main
Open Air Max is AirGradient's professional outdoor air quality monitor, designed for autonomous, off-grid operation.
It measures 182 × 101 mm and has 6 copper layers, 1.6 mm thick.
91 parts, built around the 74HC4051, PINA780BIDEKR, TPS25730SRSMR and KT-0603R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the da-penguin-guy/PiPortable repository on GitHub, at the commit this page was made from: the board is PCB/MainBoard/PiPortable.kicad_pcb and its schematic PCB/MainBoard/8Mux.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask da-penguin-guy before reusing the design.