2 layers55 × 35 mm
Mini BT Pcb-328P
d-diot/Mini-BT-Pcb-328P
MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb
54 parts3
2 layers55 × 55 mm
Gp pcb nano
d-diot/gp-pcb-nanoGeneral purpose pcb for Arduino Nano
- Size
- 55 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 46
- Pads
- 178
- Tracks, vias
- 534, 95
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Jun 2019
- Updated
- 30 Jun 2019
Overview
Gp pcb nano is an open-source printed circuit board by d-diot, from the d-diot/gp-pcb-nano repository on GitHub. It is a 2-layer board of 55 × 55 mm with 49 parts on 46 nets, routed with 534 tracks and 95 vias.
It is built around the DHT22, AMS1117-3.3 and ATSHA204A, with the FDN337N among its other parts. Its parts include 11 resistors, 11 connectors, 8 capacitors, 4 ICs and 4 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
DHT22
插件-40℃~+80℃ 3.3V 5%RH~99%RH 500uA ±3%RH 插件 Temperature and Humidity Sensor ROHSHAIGUTemperature And Humidity Sensor
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ATSHA204A
SOIC 8SOIC8 New Arrivals ROHSMicrochip TechnologyUncategorised
FDN337N
SOT-23-55℃~+150℃ 1 N-channel 120pF 2.2A 300pF 30V 400mV 500mW 65mΩ@4.5V 80pF SOT-23 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdd-diot General Purpose Pcb Nano
This pcb is part of the d-diot project.
Visit the dedicated wiki page to know more.
The d-diot nano repeater firmware can be used with this pcb
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C2, C5, C6, C8 |
| 4 | 20K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5, R6 |
| 4 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J6, J7, J9 |
| 4 | FDN337N | FDN337N:SSOT-3 | Q1, Q2, Q3, Q4 |
| 3 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R9, R10 |
| 3 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP4 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 2 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3, JP5 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R8 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 10uF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C4 |
| 1 | 22uF | Capacitor_THT:CP_Radial_Tantal_D5.5mm_P2.50mm | C3 |
| 1 | 4.7uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | ATSHA204A | Package_TO_SOT_SMD:SOT-23_Handsoldering | U4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | DHT22 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | MH-MINI-360 | MH-MINI-360:MH-MINI-360 | U1 |
| 1 | MYSX_2.6 | mysensors_connectors:MYSX_2.6_SOCKET | P1 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U3 |
| 1 | R_PHOTO | OptoDevice:R_LDR_5.0x4.1mm_P3mm_Vertical | R1 |
The 48 most common of 49 parts.
Questions
How big is the Gp pcb nano PCB?
It measures 55 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gp pcb nano use?
49 parts, built around the DHT22, AMS1117-3.3, ATSHA204A and FDN337N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gp pcb nano KiCad files?
From the d-diot/gp-pcb-nano repository on GitHub, at the commit this page was made from: the board is GP-Pcb-Nano.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gp pcb nano design in my own project?
Its repository states no licence, so its author keeps all rights: ask d-diot before reusing the design.
Similar boards
- 2 layers55 × 55 mm
- 2 layers50 × 50 mm
- 2 layers68.6 × 53.3 mm
- 2 layers69.1 × 65.5 mm
- 4 layers42 × 42 mm
Stepper Servo
jawher-Mansour/619-J_Stepper
619-J_Stepper is an open source closed loop stepper driver.
69 parts2 - 2 layers45.9 × 14.2 mm
- 2 layers50 × 30.2 mm
MiniSensor
OliverHi/MultiuseSensorPlatform
a mysensor based platform for a suite of different possible sensors
27 parts4