Skip to the content
2 layers41.4 × 35.1 mmSyncModule, the printed circuit board in 3D

UVScope control software

Size
41.4 × 35.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
7
Pads
23
Tracks, vias
43, 4
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Sep 2020
Updated
30 Mar 2023

Overview

SyncModule is an open-source printed circuit board by czbiohub-sf, from the czbiohub-sf/UVScope-control repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 41.4 × 35.1 mm with 8 parts on 7 nets, routed with 43 tracks and 4 vias.

Its parts include 2 resistors, 1 IC, 1 connector and 1 switch.

README

README.md

UVScope-control

UVScope control software

Intro

Thanks for visiting UVScope-control! Feel free to comment and make PRs in a constructive manner to help improve this project. Although it's been used to acquire hundreds of thousands of images (without errors) as part of dozens of multi-dimensional (MD) image acquisition experiments, it's likely that many bugs still exist because this software has only been tested in very narrow operating conditions, by only one user.

UVScope-control was written to control a custom ultraviolet microscope built at Chan Zuckerberg Biohub, but could be adapted to control other microscopes by replacing device-specific hardware drivers. The microscope has a main control class, but works together with other modules to control a camera, XY stage, focus stage, and multiplexed LEDs with hardware sync module. A multi-dimensional image storage and processing class, MDImage, ingests images from the microscope, saving them to disk and/or memory in real time, in a format that can easily be re-loaded later into memory. MDImage also has a 6D image viewer built-in for quickly browsing image data.

Link to our published manuscript: https://journals.plos.org/ploscompbiol/article?id=10.1371/journal.pcbi.1009257

Modules

UVScope

  • Orchestrates hardware drivers
  • Implements:
    • A GUI for user control
    • Manual image snapping and previewing via Matlab's Image Acquisition toolbox
    • A 'runMDA' method that allows it to be driven by an external object implementing a MD acquisition
    • Active focus tracking over time, and across large areas of a sample.

MDEngine

  • Runs a simple state machine
  • Keeps track of MD acquisition parameters
  • Sends commands to UVScope for MD image acquisitions (XY positions, Z-position (offsets), Z-stacks, Channels, Time points)
  • Feeds images to an MDImage object

MDImage

  • I/O for large imaging datasets
  • Manipulation of 6D imaging datasets
  • Implements the following image processing operations on large 6D datasets:
    • Digital re-focusing
    • Image stack alignment via cross-correlation
    • Timeseries drift correction via cross-correlation
    • Full transport of intensity (TIE) solver with non-uniform illumination
    • Richardson-Lucy image deconvolution (3D)
    • Flatfield illumination correction
    • Image registration between channels (affine transformation)

How it works

UVScope

Microscope wiring diagram

WiringDiagram

Parts

8
QtyValueFootprintReferences
3Conn_CoaxialConnectors_Molex:Molex_MicroLatch-53253-0270_02x2.00mm_StraightAnalogIn1, ExposureIn1, Vout1
12.8kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1
12kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR2
1Conn_01x02Connectors_Molex:Molex_MicroLatch-53253-0270_02x2.00mm_StraightJ1
1DG419Housings_DIP:DIP-8_W7.62mmU1
1SW_SPDTConnectors_Molex:Molex_MicroLatch-53253-0370_03x2.00mm_StraightSW1

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the SyncModule PCB?

It measures 41.4 × 35.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SyncModule use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SyncModule KiCad files?

From the czbiohub-sf/UVScope-control repository on GitHub, at the commit this page was made from: the board is Hardware sync module/syncModule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SyncModule design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).