4 layers24 × 27.3 mm
Aaronjamt Framework IR Module
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915
4 layers32.4 × 63.5 mm
IIoT Sensor
czagrzebski/AMC13XM0X-ModuleA module for the TI AMC13XM0X Delta-Sigma ADC
- Size
- 32.4 × 63.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 25
- Pads
- 96
- Tracks, vias
- 151, 22
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Feb 2024
- Updated
- 3 Apr 2024
Overview
IIoT Sensor is an open-source printed circuit board by czagrzebski, from the czagrzebski/AMC13XM0X-Module repository on GitHub. It is a 4-layer board of 32.4 × 63.5 mm with 39 parts on 25 nets, routed with 151 tracks and 22 vias.
It is built around the AMC130M02DFMR and FD0810004. Its parts include 13 resistors, 12 capacitors, 3 connectors, 1 IC and 1 diode. It belongs with the sensors and measurement boards of this library.
Main components
2README
README.mdAMC13XM0X-Module for Industrial Sensors
A PCB design for the TI AMC13XM0X $\Delta\Sigma$ ADC module. The module is designed to interface with industrial sensors that support 0-10V or 4-20mA output. This module features a voltage and current sensing network connected to the differential inputs of the ADC. The module is designed to be used over Serial Peripheral Interface (SPI) communication protocol.
The module features a 4-layer PCB design with a 2.54mm pitch header for interfacing with the host controller. The module is powered by a 3V3 supply. The module is designed to be used in industrial applications where high accuracy and reliability are required. The module is designed to be used with the TI AMC13XM0X $\Delta\Sigma$ ADC.
AMC13XM0X ADC Overview
The AMC13XMOX $\Delta\Sigma$ ADC is a high-precision, power isolated, simultaneous-sampling, 24-bit ADC. The AMC13XM02 features a fully integrated isolated DC/DC converter that allows single-supply operation from the low-side of the device. The reinforced and capactive isolation barrier is certified according to VDE V 0884-17 and UL1577. The isolation barrier is made of a $SiO_2$ barrier that provides $7070-V_{PEAK}$ reinforced isolation, per DIN EN IEC 60747-17.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100kΩ | Resistor_SMD:R_0805_2012Metric | R1, R9, R10, R11 |
| 4 | 100nF | Resistor_SMD:R_0805_2012Metric | C5, C7, C11, C12 |
| 4 | 1nF | Resistor_SMD:R_0805_2012Metric | C1, C4, C6, C8 |
| 4 | 49.9Ω | Resistor_SMD:R_0805_2012Metric | R2, R3, R5, R6 |
| 3 | , , | ||
| 2 | 1µF | Resistor_SMD:R_0805_2012Metric | C2, C3 |
| 2 | 4.7nF | Resistor_SMD:R_0805_2012Metric | C9, C10 |
| 2 | Ferrite | Resistor_SMD:R_0805_2012Metric | FB1, FB2 |
| 1 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 27Ω | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 33Ω | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 619Ω | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 68Ω | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | AMC130M02DFMR | Custom:AMC130M02DFMR | IC1 |
| 1 | CH0 | Custom:CUI_TB001-500-02BE | J4 |
| 1 | CH1 | Custom:CUI_TB001-500-02BE | J5 |
| 1 | FD0810004 | Custom:FD0810004 | Y1 |
| 1 | LED | Resistor_SMD:R_0805_2012Metric | D1 |
| 1 | MCU Input | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
The 36 most common of 39 parts.
Similar boards
- 4 layers20.3 × 48.3 mm
BlueMacro
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
39 parts100BSD-3-Clause - 4 layers26 × 30 mm
Day 03 ECG SPO2
i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop
39 parts95CERN-OHL-P-2.0 - 4 layers67.8 × 18.3 mm
- 4 layers51.5 × 26.5 mm
Servo dev board
OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.
39 parts39Apache-2.0 - 4 layers54 × 11.6 mm
BrodBoost PD
axiometa/BrodBoost-PD
Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip
39 parts38 - 4 layers79 × 39.1 mm
Connector pcb
festlv/mso5000-logic-probe
Cheap logic probe for Rigol MSO5000-series oscilloscopes
39 parts37MIT - 4 layers46.7 × 46.7 mm
1.5V switcher test
oresat/oresat-gps-hardware
Hardware for OreSat's SDR GPS receive and other SDR GPS projects
39 parts34CERN-OHL-S-2.0
Questions
How big is the IIoT Sensor PCB?
It measures 32.4 × 63.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the IIoT Sensor use?
39 parts, built around the AMC130M02DFMR and FD0810004. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IIoT Sensor KiCad files?
From the czagrzebski/AMC13XM0X-Module repository on GitHub, at the commit this page was made from: the board is IIoT_Sensor.kicad_pcb and its schematic IIoT_Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IIoT Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask czagrzebski before reusing the design.